|
04/09/2020, 08:44 AM | #1 |
Registered Member
Join Date: Apr 2010
Location: Canada
Posts: 127
|
Magnesium settling in dosing reservoir
So I just set up a dosing pump, I’m using a glass container for the additives.
I filled the glass container with brightwell magnesium yesterday and this morning it has settled to the bottom of the solution. The bottom 3/4” is cloudy and thick, while the top is 6” is clear. What have I done wrong here? |
04/09/2020, 08:49 AM | #2 |
Registered Member
Join Date: May 2015
Posts: 134
|
I put some small pumps in my dosing containers, to keep the solution mixed.
Sent from my iPhone using Tapatalk |
04/09/2020, 08:55 AM | #3 |
Registered Member
Join Date: Apr 2010
Location: Canada
Posts: 127
|
I figured with a pre mixed solution such as this it wouldn’t be required. I never had to shake the bottle or anything when I added it straight from what is was sold in
|
04/09/2020, 08:56 AM | #4 |
Registered Member
Join Date: Apr 2010
Location: Canada
Posts: 127
|
I did add the small amount left of my Red Sea magnesium to the brightwell when I filled the dosing container. Perhaps it did something? Seems unlikely.
|
04/09/2020, 09:39 PM | #5 |
Registered Member
Join Date: Mar 2004
Location: Alabama
Posts: 2,912
|
If the solution is too concentrated, cooler temperature can precipitate salts.
Try diluting with ro water, like 3:1, see if it clears. Also, if it is basic from residual NaHCO3 it will ppt, add acetic acid to solublize.
__________________
OK, but where does the meat go! ------------------------------------------------ 120g SPS, 125g mix, 56g FOWLR, 20g qt |
04/10/2020, 03:23 PM | #6 | |
Registered Member
Join Date: Apr 2010
Location: Canada
Posts: 127
|
Quote:
|
|
|
|