|
12/28/2013, 10:36 PM | #1 |
Registered Member
Join Date: Jun 2005
Location: Denver
Posts: 1,149
|
MP10wes and Radion Pro Sync question
Well I just recently picked up an mp10wes to go along with the Radion pro over my 60g cube, and I am more than happy. My question is regarding the sync between the light and the mp10. I think I have it set up on EcoSmart Live:
1. Settings 2. EcoSMART Participation tab 3. On- lights will put pumps into night mode. How do I know if the pump is in night mode? The lights are in lunar cycle on the tank, and the mp seems to be running at normal speed. Will any of the colors change to indicate night mode? Thanks,
__________________
-Randall- What? You pooped in the refrigerator? And you ate the whole... wheel of cheese? How'd you do that? Heck, I'm not even mad; that's amazing. -Ron Burgundy- Current Tank Info: 60 gal cube |
12/28/2013, 10:47 PM | #2 |
Registered Member
Join Date: Apr 2013
Location: Chicago/NW Burbs
Posts: 168
|
The mp10 controller will be illuminated white I believe and at only 20% constant.
So if your start day is 1130am and end day is 10pm, at 10 pm it will switch to night mode until 1130am following day
__________________
Current Tank: RedSea Reefer 350, Powered Vectra m1, mp40qd,10&Ecotech bbu, Nanobox mimic, Apex lite w/wxm & ald Nanobox fugelite |
12/28/2013, 10:52 PM | #3 |
Registered Member
Join Date: Jun 2005
Location: Denver
Posts: 1,149
|
When I'm logged into Ecosmart Live, should I see the mp show up anywhere on the screen as a device or just the Radion Pro?
I just checked and the lights on the mp knob are still on yellow and seems to be running like normal... Lights are on lunar
__________________
-Randall- What? You pooped in the refrigerator? And you ate the whole... wheel of cheese? How'd you do that? Heck, I'm not even mad; that's amazing. -Ron Burgundy- Current Tank Info: 60 gal cube |
12/30/2013, 08:02 AM | #4 |
Registered Member
Join Date: Mar 2013
Location: Allentown, PA
Posts: 1,956
|
Clowninaround,
At this time, VorTech pumps will not be displayed in EcoSmart Live. Also, if EcoSmart participation is enabled, please follow these steps to correct the issue: 1. Disconnect via USB and power down all lights and pumps for at least 30 seconds 2. Log in to EcoSmart Live using Google Chrome or Safari 3. Select the “Settings” then “New Profile” and “Yes” 4. Log out of EcoSmart Live 5. Start the Connection Manager and connect via USB to one Radion (No ReefLink) 6. Right click the connection manager icon select “USB Radion” then “Factory Reset” and “Yes” 7. Repeat step 6 for each light 8. Log in to EcoSmart Live and program your lights using the Aquarium Setup 9. Select the "Settings" button then "EcoSmart Participation" and "On" 10. Select the “Program All” button to save all changes If you continue to experience issues, Please give us a call 1-800-785-0338 Ext. 2.
__________________
Alex Y. Customer Service Representative at EcoTech Marine Call: 1-800-785-0338 Ext. 2 or E-mail: Service@EcoTechMarine.com |
Thread Tools | |
|
|