Reef Central Online Community

Go Back   Reef Central Online Community > General Interest Forums > New to the Hobby
Blogs FAQ Calendar Mark Forums Read

Notices

User Tag List

Reply
Thread Tools
Unread 09/17/2020, 10:14 AM   #1
Zpmada
Registered Member
 
Join Date: Sep 2017
Location: Phillipsburg, NJ
Posts: 95
Mixing sand? Original grade with coarse - bad idea?

Hello,

I am upgrading my 55 gallon fish tank which has 30-40 lbs of CaribSea Ocean Direct Caribbean Sand Original Grade Substrate ("Original Grade Substrate is, by weight, less than 1 mm in size (most of that are smaller than 0.66 mm"). I am buying a 75 gallon running system that was for sale locally and has CaribSea Fiji Pink sand Grain size: 0.5-1.5mm. I'm not sure how much sand is in the system, but I would estimate it to be ~1" deep in a 75 gallon, which I think is defined as a shallow sandbed. Would it be a bad idea to mix the two sand beds? I read that coarse sand can create toxic gas pockets in deep sandbeds. How deep is too deep? Would I be ok mixing them if I'm at ~2 inches deep?

The goal is to provide the best substrate for copepods to feed a Green Mandarin Dragonet.

There will also be a sump with chaeto.

Thanks



Last edited by Zpmada; 09/17/2020 at 10:42 AM.
Zpmada is offline   Reply With Quote
Unread 09/17/2020, 02:36 PM   #2
Duality
Registered Member
 
Duality's Avatar
 
Join Date: May 2013
Posts: 385
Mixing sand? Original grade with coarse - bad idea?

I use crushed coral as a substrate. I have mass amounts of flow in my aquarium and anything other then crushed coral was always in the water column. Personally I’m happy with crushed coral sand. Multiple reasons. It doesn’t fly up into the water column, it’s pretty easy to vacuum, and the 3 leopard wrasses don’t have any issues diving into it, even the carpet anemone doesn’t seem to be bothered by crushed coral. The only down fall is that if I go anymore when a month with out vacuuming the sand bed the crushed coral grows coraline algae and the sand bed turns pink. I like having the sand bed somewhat white.



Duality is offline   Reply With Quote
Unread 09/19/2020, 11:33 AM   #3
Michael Hoaster
Registered Seaweedist
 
Michael Hoaster's Avatar
 
Join Date: Feb 2004
Location: Boulder, CO
Posts: 5,807
Yes, you can mix grains sizes, no problem. Different grain sizes allow for different pore water spaces between the grains, which facilitates diversity of bacteria. This is good for both nitrification and denitrification, which means less Nitrate accumulating in the tank. So, those fine grains are great for deep sand bed filtration.

The larger crushed coral is also quite useful as a top layer. As Duality pointed out, it doesn't get blown around by powerheads, so you don't end up with bare bottom patches. As a further bonus, a half inch or so layer of it on top provides superb refuge for pods. Not only can they move freely amongst the 'boulders', the larger gaps between them accumulate food right where the pods are.

In my tank, I put sugar size sand on the bottom, a medium grain in the middle, and the large crushed coral on top.


__________________
As many naturalists and environmentalists have suggested, we should set aside our arrogance,
our desire to conquer and control everything, and walk hand in hand with Mother Nature. -Walter Adey

Current Tank Info: 180g Seagrass Sandbar Lagoon, START DATE November 28, 2018
Michael Hoaster is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -6. The time now is 05:09 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2024 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright ©1999-2022
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.