|
02/07/2018, 02:10 PM | #1 |
Registered Member
Join Date: Dec 2014
Location: Rugby
Posts: 92
|
Salifert Iodine Test Kit
I’m testing for Iodine but getting a weird result. After 1ml of water I add one drop I2-2 followed by 4 drops of I2-3. This gives a light yellow result. I’ve then added 3 drops of I2-2 and checked the result. Yellow again! The colour chart suggests ranges of blue. What is going wrong, any ideas?
Sent from my iPhone using Tapatalk |
02/07/2018, 06:15 PM | #2 | |
Registered Member
Join Date: Aug 2014
Posts: 1,432
|
Quote:
The literature that comes with the kit (online) indicates that the test contains two procedures, one for iodide, one for iodine/iodate. |
|
02/08/2018, 03:16 AM | #3 |
Registered Member
Join Date: Dec 2014
Location: Rugby
Posts: 92
|
The colour chart states the opposite. Blue colour iodate and green colour iodide
Sent from my iPhone using Tapatalk |
02/08/2018, 03:17 AM | #4 |
Registered Member
Join Date: Dec 2014
Location: Rugby
Posts: 92
|
Interestingly today it’s now a clear reading. Dosed yesterday, got a colour response, today none. I’ve raised another post asking if carbon impacts Iodine
Sent from my iPhone using Tapatalk |
02/08/2018, 08:00 AM | #5 |
Registered Member
Join Date: Aug 2014
Posts: 1,432
|
OK good luck. I think that I gave an opinion on your new topic as well
|
02/08/2018, 11:48 AM | #6 |
RC Mod
Join Date: Mar 2002
Location: Mountain View, CA, USA
Posts: 88,616
|
I probably shouldn't comment, but the Salifert iodine kit was one of the few testing setups I was unable to get to work at all. You might need a new kit.
__________________
Jonathan Bertoni |
|
|