|
07/14/2017, 08:08 PM | #51 |
Registered Member
Join Date: May 2013
Location: Northern Virginia
Posts: 60
|
Yeah, so I'm jelly as hell. Very clean, and well thought out setup. I'll be following along for sure.
|
07/15/2017, 07:01 AM | #52 |
Registered Member
Join Date: Oct 2011
Location: Huntington, wv
Posts: 675
|
This is probably one of the best builds I've ever seen. The planning, attention to detail, and execution is superb. im pretty sure you have more in just the plumbing than I have in my entire system. Awesome!!
__________________
Enthusiasm without knowledge is no good. Haste makes waste. WINTER IS COMING |
07/15/2017, 08:18 AM | #53 | |||
Registered Member
Join Date: Mar 2011
Location: Golden, CO
Posts: 340
|
A Golden Reef Tank (v2)
Quote:
The short answer: Most of the tanks are hooked together to form one big system with the exception of the QT rack isolated on the far wall. That is its own modular system. Even with the tanks that are hooked together, I'm setting it up ahead of time so that the frag tanks can run on their own with a dedicated sump with a turn of a valve or share the displays water by turning the same valve. I'm trying to make the system as modular as possible while maintaining reliability. The same with the refugium. I will try to put something together to explain how everything is hooked together and/or stand alone. The thread prior to the photo disaster explained it pretty well but it doesn't make sense without pictures. After reloading that many pictures, I don't have the motivation to explain each one. I am considering a video walk through but I think I'll wait until I have water flowing. The cycling will take forever so I'll have a lot of time for videos. Quote:
Thanks. I have taken a lot of inspiration from previous builds here. I'm putting my own spin on their designs. Quote:
Thanks for following. |
|||
07/15/2017, 08:40 AM | #54 |
Cnidaria lover
Join Date: Nov 2015
Location: Winterpark FL
Posts: 1,483
|
My word, such a great build so far, very well planned and clean looking. I second the jelly-ness.
Subscribed
__________________
"I glue animals to rocks" Current Tank Info: 80gal build in the works |
07/15/2017, 06:36 PM | #55 |
Registered Member
Join Date: Dec 2012
Posts: 95
|
Beat build i seen. Cant imagine the time u spend putting together a drawing of the whole plumbing.
Following along Sent from my iPhone using Tapatalk
__________________
I dont have a gun license .... but i got my permit |
07/16/2017, 06:16 AM | #56 | ||
Registered Member
Join Date: Mar 2011
Location: Golden, CO
Posts: 340
|
Quote:
Quote:
Other than that, when it finally came time to plumb, I just did a lot of sitting and staring. I tried to think far ahead but didn't have an exact plan. |
||
07/16/2017, 09:21 AM | #57 |
Registered Member
Join Date: Jul 2004
Location: Great Falls, MT
Posts: 1,404
|
wouldn't the golden ratio be 36"x58"? 1.61... you've got 1.33...
edit: I plugged it into multiple calculators for the golden ratio to see if my math was wrong.. got the same results.. 3'x5' would be closer... closest to 4' i found was 32"x52"..
__________________
300 gallon 8ft long, 2x xf250 gyre, reef octopus 250-int - work in progress Aquarist since 1986 Last edited by Mishri; 07/16/2017 at 09:49 AM. |
07/16/2017, 10:07 AM | #58 |
Registered Member
Join Date: Mar 2011
Location: Golden, CO
Posts: 340
|
Good call Mishri. The bottom and top 2" will be covered by counter and woodwork respectively. That leaves 32" of viewable vertical viewing area by 48". Technically, the length of the sides should have been 51.2" with that vertical viewing space.
So, I should probably tear the entire thing down and start over. It will never work. I had to compromise a little when ordering the tank. It wasn't cheep to start with and I got a little price break with the dimensions I ended up with due to how the materials worked out. |
07/16/2017, 11:12 AM | #59 |
Registered Member
Join Date: Apr 2014
Location: Germany
Posts: 582
|
Fantastic. Congratulations. Can't wait to see more.
Greetings Torben Gesendet von meinem SM-G935F mit Tapatalk |
07/17/2017, 12:11 PM | #60 |
Registered Member
Join Date: Mar 2011
Location: Golden, CO
Posts: 340
|
Thanks Achilles. It's still slow progress but I'm moving forward.
I worked on the framework that will support the hood and lights on the display this weekend. The entire hood will roll out and suspend off of the front end of the tank with 60" heavy duty glides. I will build an acrylic shield that will protect the glides from splashing. Hopefully I will be able to keep that area dry enough to prevent corrosion. |
07/17/2017, 12:11 PM | #61 |
Registered Member
Join Date: Mar 2011
Location: Golden, CO
Posts: 340
|
|
07/17/2017, 12:12 PM | #62 |
Registered Member
Join Date: Mar 2011
Location: Golden, CO
Posts: 340
|
|
07/17/2017, 12:12 PM | #63 |
Registered Member
Join Date: Mar 2011
Location: Golden, CO
Posts: 340
|
The back side in the filtration room. I will be using a cable chain guide on the electric cables so that everything is well managed and protected as the rack rolls out and in. I am on hold with the rest of this rack while I wait for more fasteners.
|
07/17/2017, 12:13 PM | #64 |
Registered Member
Join Date: Mar 2011
Location: Golden, CO
Posts: 340
|
I also picked up a few more pieces of the aluminum strut so I was able to complete the mounting of the Reefbreeder LED's over the QT tanks. The tanks are pretty dirty right now. They're also scratched because they were originally salvaged from a store years ago. I modified them and buffed them as well as I could (or was willing to). They're QT, so I'm not extreemly concerned that they aren't show quality. They do the job.
|
07/17/2017, 05:55 PM | #65 |
Registered Member
Join Date: May 2013
Location: Northern Virginia
Posts: 60
|
Lookin sharp. How do you like the aluminum framing? I've been considering it for a possible future build, but I've heard its pretty expensive.
|
07/17/2017, 09:01 PM | #66 |
Registered Member
Join Date: Mar 2011
Location: Golden, CO
Posts: 340
|
The aluminum is a lot of fun to work with. I probably wouldn't use it to build a stand out of even though I know that's totally possible. I would just worry about deflection so I would end up way overbuilding it. There is deflection calculator software available. Still, I really like a solid tube steel frame.
For other less critical frames like a hood, it's nice. I will be able to adjust the rails on top to best fit the lights I end up with. Then, it's just a thin wood facade for aesthetics that doesn't need to hold any real weight. |
07/18/2017, 02:47 AM | #67 |
Registered Member
Join Date: Jan 2010
Location: Canadia
Posts: 4,276
|
Maybe I missed it, but why does the light rack extend into the living space instead of into the fish room?
Dave.M
__________________
My Gawd! It's full of corals! Current Tank Info: None. Nil. Zip. Nada. |
07/18/2017, 05:20 AM | #68 |
Registered Member
Join Date: Mar 2011
Location: Golden, CO
Posts: 340
|
Once the woodwork is on including trim and crown mounding at the top, it won't fit through the hole into the fish room.
I tried to think of all of the possible ways to access the tank and this was the only solution I could come up with. My wife didn't want the hood to extend all the way to the ceiling for esthetic reasons. She didn't want a massive tall hood like we had on our last tank, which did look odd. But, the shorter hood is also too close to the ceiling to allow flip up sides that provide enough space for me to reach all the way into the tank. Basically, in the end, I had to find a way to move the entire hood out of the way at least periodically if I need to go snorkeling. The wood facade will have access doors or panels of some sort to allow daily feedings and maintenance without moving the entire assembly. |
07/18/2017, 10:33 AM | #69 | |
Registered Member
Join Date: May 2013
Location: Northern Virginia
Posts: 60
|
Quote:
|
|
07/21/2017, 05:47 AM | #70 |
Registered Member
Join Date: Mar 2014
Posts: 104
|
This is the mother of all picture dump!! I love it. It be great to see now. A lot different than when I helped carry the tank down
|
07/21/2017, 05:57 AM | #71 |
Registered Member
Join Date: Mar 2011
Location: Golden, CO
Posts: 340
|
Thanks again for breaking your back to help get the tank down!
I think I need to light off some fireworks once I finally plug in the first pump to start moving water. Signal all the locals to come over and check it out. I'm sure there have been slower builds over the years but from my perspective it feels like I'm going for the Guinness record. Lighting will be a huge milestone. Hooking them up will be pretty simple. Dialing them in might take forever. Still, one major step towards being wet. |
07/21/2017, 09:10 AM | #72 |
Registered Member
Join Date: May 2004
Location: Staten Island, NY
Posts: 446
|
Mind absolutely blown!
The attention to detail has a very pleasing effect. Too often people settle for good enough. Your setup is one of the best if not THE best I've seen to date. KUDOS! This thread should be used as a guide for striving hobbyists when designing and building their fish rooms. Your extensive skills are amazing as well. EXTREMELY WELL DONE! |
07/22/2017, 01:47 AM | #73 |
Registered Member
Join Date: Sep 2016
Location: Fort Collins, CO
Posts: 248
|
Spectacular! If only I had the funds for this....
Those reefbreeders are wonderful have some myself good choice!
__________________
180gal build custom stand, Photon V2's 32in/T5 Supplements B+ http://www.reefcentral.com/forums/showthread.php?t=2644 200 gal frag system. T5 C+B+ combo Owner Hidden Treasure Corals LLC |
07/22/2017, 08:49 AM | #74 | |
Registered Member
Join Date: Mar 2011
Location: Golden, CO
Posts: 340
|
A Golden Reef Tank (v2)
Quote:
Thank you for all of the compliments. I have put a lot of effort into making this as ideal as possible based on my priorities. I owe a lot of inspiration to everyone out there who's ideas I'm adopting and I'm bringing some of my experiences into the mix. Not everyone has the same priority. There are probably a HUGE number of people skimming through that would probably use the funds to have a front display twice the size and a much more reasonable filtration room. Thanks for following! |
|
07/22/2017, 08:52 AM | #75 | |
Registered Member
Join Date: Mar 2011
Location: Golden, CO
Posts: 340
|
Quote:
I'm pretty happy with those lights so far. I haven't put them to any real use, but they fit the space perfectly and are ideal for this application. |
|
|
|