how to reconnect 6091 wave controller?

DrDNA · 10/20/2018, 03:07 PM

I have two of the old style waveboxes - the ones with the hockey pucks and 6091 wave controllers. I haven't used them in years and am trying to figure out to sync both of them up. Do i just link the master cable to one and the slave cable to the other?

rvitko · 10/22/2018, 09:24 AM

In general that is all there is to it, but inside the controller is a jumper, from the factory it is set to synchronous, both boxes on the same side, to do one on each side use inverse, the other option is external which lets a 7095 for example switch it off and on to alternate between sets of wave boxes or pumps/waveboxes.

10/20/2018, 03:07 PM	#1
DrDNA Registered Member Join Date: Mar 2006 Location: Loomis, CA Posts: 1,152	how to reconnect 6091 wave controller? I have two of the old style waveboxes - the ones with the hockey pucks and 6091 wave controllers. I haven't used them in years and am trying to figure out to sync both of them up. Do i just link the master cable to one and the slave cable to the other? __________________ O O o o O O o o o o o o O <º)))>< <º)))>< <º)))>< <º)))>< Jeff Current Tank Info: 300g and 540g on one system, 165g sump, lifereef VS3-72 skimmer, LED lighting

10/22/2018, 09:24 AM	#2
rvitko RC Sponsor Join Date: Apr 2000 Location: Austin Texas USA Posts: 35,785	In general that is all there is to it, but inside the controller is a jumper, from the factory it is set to synchronous, both boxes on the same side, to do one on each side use inverse, the other option is external which lets a 7095 for example switch it off and on to alternate between sets of wave boxes or pumps/waveboxes. __________________ Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish