|
02/08/2011, 06:52 PM | #1 |
Registered Member
Join Date: Oct 2006
Posts: 8
|
Motor for a kalkwasser reactor.
Hi I want to make a reactor Kalkwasser my power I have an acrylic tube 4 inches which I use for this.
I'm looking at two of its products that interest me but do not quite understand. http://www.avastmarine.com/ssc/do/pr...1-MOTORHOUSING http://www.avastmarine.com/ssc/do/pr...or-Replacement I can explain what is the difference. |
02/08/2011, 11:23 PM | #2 |
RC Sponsor
Join Date: Oct 1999
Location: Rockville MD
Posts: 707
|
Hi yvanra,
You are on the right track, but the motor housing we sell is meant as a replacement for older Kalk stirrers we built a few years ago. These have a groove for a 4.5" diameter tube. The 4" tube might work, but the lid wouldn't sit on the tube as well. The motor replacement in the second link is just the gearmotor itself- the photo is misleading, and I need to update it. Sorry for the confusion there. Hope this helps, Justin |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
GEO Kalkwasser Reactor & BRS Kalkwasser f/s 07033 | ricwilli | New Jersey Reefer's Club | 1 | 01/13/2011 05:22 PM |
HELP! too much pressure in my Kalkwasser reactor | tedmck | Do It Yourself | 1 | 07/20/2010 06:57 PM |