|
08/02/2020, 06:31 PM | #1 |
Registered Member
Join Date: Apr 2011
Posts: 170
|
How to remove modules, etc?
I bought a used Profilux 4 and trying to remove everything and have factory default. It has in system extra powerbars; vortech controller etc and I dont have that. Is there away to clean everything out?
|
08/03/2020, 04:56 AM | #2 | |
Ver. 2.1
Join Date: Mar 2005
Location: Rehoboth, MA
Posts: 1,803
|
Quote:
This only runs on a PC, so if you have a MAC, you will need to run Boot Camp, Parallels, etc. Connect your P4 via the USB cable. Under the system tab, you can delete the modules you don't have. I would suggest deleting them all. Then up top, open the Devices tab, there you can reset defaults, and update the firmware.
__________________
Pete "I never make mistakes... I thought I did once, but I was wrong" Current Tank Info: In the process - http://reefcentral.com/forums/showthread.php?t=2661614 |
|
08/25/2020, 07:23 PM | #3 |
Registered Member
Join Date: Sep 2014
Posts: 52
|
Did you figure it out and does everything work?
|
08/28/2020, 08:06 AM | #4 |
Registered Member
Join Date: Apr 2011
Posts: 170
|
Yes figured it out. However, my conductivity probe cant get calibrated. I dont think its a big deal but maybe I need new probe.
|
Thread Tools | |
|
|