|
01/31/2018, 12:32 AM | #1 |
Registered Member
Join Date: Sep 2004
Posts: 556
|
6105 master slave
Hi guys. I have two 6105 powerheads and was wondering how to run one as a master and the other one a slave.
Thanks guys! Sent from my iPhone using Tapatalk |
01/31/2018, 11:27 AM | #2 |
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
Set one to external mode with Main power at 100% the other two knobs to off. Connect the two controllers with a cable, you will make all the settings on the cable not in external mode. By default they will be synchornized, if you want the slave pump to run the opposite pulse so it is in pulse speed when the other is in main speed, push the food timer button and hold for 2 seconds on the pump in external mode.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
01/31/2018, 12:40 PM | #3 | |
Registered Member
Join Date: Sep 2004
Posts: 556
|
Quote:
Thank you so much for this. The cable I need to do this is the 7092.300 Right? Sent from my iPhone using Tapatalk |
|
01/31/2018, 02:48 PM | #4 |
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
Yes, but a MIDI cable from Guitar Center will also work, or anyplace else you can find one.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
01/31/2018, 06:58 PM | #5 |
Registered Member
Join Date: Sep 2004
Posts: 556
|
Ok. Thank you. I already have some midi cables at home.
Sent from my iPhone using Tapatalk |
|
|