|
|
|
02/29/2020, 08:50 AM
|
#1 |
|
Registered Member
Join Date: Nov 2001
Posts: 1,524
|
Connector between streams needs to be reset under some circunstances
Hi Rogg,
You may have told me this a while ago. But it took me a while to figure out last night that the streams have to be disconnected from power for some length of time (to 'reset' them). I found last night after I repositioned my streams that there was no alternating flow and the mooon light wasnt activating. I was really scared somethign was wrong with the controllers. This morning I thought to unplug them. I left them unplugged 15 mins (no power) and after that the light works, and I have alternating flow again  . Apparently something I did made me have to reset it (?). Odd? |
|
|
|
03/01/2020, 06:18 PM
|
#2 |
|
RC Sponsor
 
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
Usually what happens is if the cables are connected after the pumps are powered up, the controller hangs up in night mode or food timer, but typically this resets itself after a daylight cycle or the 10 minute food timer counts down.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
|
|
|
 |
|
|
