|
06/25/2011, 10:42 AM | #1 |
Registered Member
Join Date: Apr 2004
Posts: 8
|
EB8 Wattage error
I have read both the user guides, and numerous threads here but am still stumped.
I calibrated my eb8 via telnet with NOTHING hooked up, it was fluctuating between 1.4 to 1.7 amp draw with nothing plugged in before the calibration, after the calibration it fluctuates between 0.0 & 0.3 amp draw still with nothing plugged in? Any help appreciated, so many threads to read and my frustration with it is making my head hurt on a weekend Mutley Ps. EB8 is brand new, ordered from PA, it arrived Thursday Last edited by mutley29; 06/25/2011 at 11:00 AM. |
06/25/2011, 01:40 PM | #2 |
Registered Member
Join Date: Mar 2005
Location: Huntsville, AL
Posts: 2,645
|
You may need to contact Neptune for that one, sounds like a faulty unit. support@neptunesys.com
Todd
__________________
Amendment IX The enumeration in the Constitution, of certain rights, shall not be construed to deny or disparage others retained by the people. Current Tank Info: 125g Reef |
06/25/2011, 03:36 PM | #3 |
Registered Member
Join Date: Aug 2010
Posts: 4,041
|
I used to get weird amp fluctuations when wires and other electrical cords were touching any Apex wires and probes. I know you have nothing connected, but try moving some wires around. Hopefully it's not a faulty unit.
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Apex Web Page "404 Not Found" Error | MJDiP | Neptune Systems | 29 | 09/11/2013 01:51 PM |
EB8 Too Many Amps with Apex | blackfin73 | Neptune Systems | 13 | 07/11/2013 01:29 PM |
USA Prime Chiller Error P2 | jlambke | Lighting, Filtration & Other Equipment | 1 | 07/18/2011 05:22 PM |
EB8 with power compact issue. | clittrell | Neptune Systems | 5 | 07/02/2011 06:21 PM |
EB8 and Extension Socket Problems | Burly | Neptune Systems | 2 | 12/28/2010 11:54 PM |