Reef Central Online Community

Go Back   Reef Central Online Community > Sponsor Forums > Royal Exclusiv / Bubble King
Blogs FAQ Calendar Mark Forums Read

Notices

User Tag List

Reply
Thread Tools
Unread 02/07/2018, 09:35 AM   #1
firsttank
Registered Member
 
Join Date: Jul 2008
Location: detroit
Posts: 231
BK mini 160 pump stopped , need guidance

Hi , please see pics below.

The pump just stopped working. The skimmer is 2yrs old and gets maintained every 6 months.

I took it apart and cant seem to find any calcification of any sort.

The impeller is not moving freely so I put it in vinegar for 12hrs now and its still not moving freely.

Please advice What can I do next?










firsttank is offline   Reply With Quote
Unread 02/07/2018, 11:48 AM   #2
slief
RC Sponsor

 
slief's Avatar
 
Join Date: Sep 2009
Posts: 14,173
Not sure what you mean by not moving freely but if you mean the impeller doesn't rotate when inside the motor, there may be some buildup inside the bearing. See post 2 in the link below. Also note that 12 hours in vinegar can damage the pump. Vinegar is used in the boat manufacturing business to clean up cured and uncured epoxy. Epoxy is used in the potting of most pumps and prolonged exposure to vinegar can soften the epoxy and compromise the connection where the wires go into the block as well as the bond for the magnet and damage the rubber o-rings.

I am sending you a PM so we can discuss some potential issues and get clarification of the impeller not spinning freely.

Post 2 in the link below shows the bearings. Post 1 discusses proper cleaning and maintenance which would apply to all Red Dragon pumps.
http://www.reefcentral.com/forums/sh....php?t=2573406


__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
slief is offline   Reply With Quote
Unread 02/07/2018, 12:50 PM   #3
firsttank
Registered Member
 
Join Date: Jul 2008
Location: detroit
Posts: 231
Hi I have sent you my details.

When I said that the impeller dosent seem to move freely. I wanted to say that when I take the impeller out of the pump and try to rotate it in my hand I feel resistance its not rotating freely.


firsttank is offline   Reply With Quote
Unread 02/07/2018, 09:05 PM   #4
firsttank
Registered Member
 
Join Date: Jul 2008
Location: detroit
Posts: 231
Thank you very much for the help. Your root cause analysis and guidance helped me fix the problems. You saved me atleast 225 dollars for a replacement impeller and grief of not having a skimmer on my reef.

Awesome support.


firsttank is offline   Reply With Quote
Unread 02/08/2018, 03:43 PM   #5
ReefClownMIA
RC Sponsor
 
ReefClownMIA's Avatar
 
Join Date: Mar 2009
Location: Fort Myers, FL
Posts: 319
What ended up being the issue?


__________________
Marco
Royal Exclusiv USA - Fort Myers, FL Operations
For All Royal Exclusiv / Bubble King questions please refer to our Sponsor forum: http://reefcentral.com/forums/forumdisplay.php?f=745

Current Tank Info: RS Reefer 450
ReefClownMIA is offline   Reply With Quote
Unread 02/08/2018, 05:57 PM   #6
slief
RC Sponsor

 
slief's Avatar
 
Join Date: Sep 2009
Posts: 14,173
Quote:
Originally Posted by ReefClownMIA View Post
What ended up being the issue?
The upper bearing in the impeller shield was calcified or had something in it that made it stick the shaft. If you look close at the last picture, you can see the white buildup between the magnet and the upper bearing that goes into the impeller shield which stood out to me.Especially when he indicated that the impeller was hard to spin. The buildup was preventing the impeller from spinning. I had him use a butter knife to free it by pushing the knife in between the bearing and the magnet and that did the trick once it was freed up.


__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745

Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
slief is offline   Reply With Quote
Unread 02/08/2018, 07:00 PM   #7
firsttank
Registered Member
 
Join Date: Jul 2008
Location: detroit
Posts: 231
Quote:
Originally Posted by slief View Post
The upper bearing in the impeller shield was calcified or had something in it that made it stick the shaft. If you look close at the last picture, you can see the white buildup between the magnet and the upper bearing that goes into the impeller shield which stood out to me.Especially when he indicated that the impeller was hard to spin. The buildup was preventing the impeller from spinning. I had him use a butter knife to free it by pushing the knife in between the bearing and the magnet and that did the trick once it was freed up.
Exactly. Once I was free then it went through couple of vinegar baths and then water spray.


firsttank is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -6. The time now is 07:59 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2024 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright ©1999-2022
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.