How do you reset the new ERROR command

Jyetman · 04/10/2018, 04:34 PM

I'm testing the function of the new WHEN and ERROR commands. Once a error is detected it won't reset back to a no error condition. When will it reset back or do I have to manually reset the controller?

jonmos75 · 04/11/2018, 12:24 AM

You have to manually put the outlet back from OFF to AUTO to clear the error, the when programming makes it so you do not have to create VOs (Virtual Outlets) to create a latching outlet.

Here talks about both the new WHEN and ERROR commands in detail
https://forum.neptunesystems.com/sho...-Firmware-4-52

Jyetman · 04/11/2018, 09:30 PM

Quote:

Originally Posted by jonmos75

You have to manually put the outlet back from OFF to AUTO to clear the error, the when programming makes it so you do not have to create VOs (Virtual Outlets) to create a latching outlet.

Here talks about both the new WHEN and ERROR commands in detail
https://forum.neptunesystems.com/sho...-Firmware-4-52

If you don't want to manually slide the switch position back you'll still have to create VOs not to latch the outlet. It would be useful to have the ability for both ways.

04/10/2018, 04:34 PM	#1
Jyetman Registered Member Join Date: Nov 2012 Location: Phoenix, AZ Posts: 1,712	How do you reset the new ERROR command I'm testing the function of the new WHEN and ERROR commands. Once a error is detected it won't reset back to a no error condition. When will it reset back or do I have to manually reset the controller?

04/11/2018, 12:24 AM	#2
jonmos75 Registered Member Join Date: Apr 2013 Posts: 193	You have to manually put the outlet back from OFF to AUTO to clear the error, the when programming makes it so you do not have to create VOs (Virtual Outlets) to create a latching outlet. Here talks about both the new WHEN and ERROR commands in detail https://forum.neptunesystems.com/sho...-Firmware-4-52