|
05/04/2013, 06:30 PM | #1 |
Registered Member
Join Date: Mar 2003
Location: South Bend, Indiana
Posts: 86
|
75g sump baffle dimensions
Hey guys first time messing around with silconing glass and was wondering the who has done a 75g sump and have siliconed glass baffles and what dimensions baffles you had cut. I measured yesterday and just want to make sure I have the right width. Thanks guys!!
|
05/05/2013, 06:00 AM | #2 |
Registered Member
Join Date: Mar 2003
Location: South Bend, Indiana
Posts: 86
|
Anyone?? I measured this morning and my closest measurement is 17 3/8 wide, is that close? Using the 1/4 rule would I get my glass cut at 17 1/8?
|
05/05/2013, 07:20 AM | #3 |
Registered Member
Join Date: Dec 2007
Location: Illinois
Posts: 267
|
When I did mine I measured the width from corner to corner then minus the thickness of the glass and cut 1/4 smaller so you have 1/8 on each side for silicone.
|
05/06/2013, 12:48 PM | #4 | |
Registered Member
Join Date: Dec 2003
Location: Long Island (NY)
Posts: 4,077
|
Quote:
I don't remember the exact dimensions of my baffles, but this was how I figured out the length. Make sure you measure the INSIDE of the tank
__________________
Eric "One thing that humbles me deeply is to see that human genius has its limits while human stupidity does not." Current Tank Info: Taking a break |
|
Thread Tools | |
|
|