|
06/05/2018, 03:47 PM | #1 |
Registered Member
Join Date: Feb 2011
Posts: 2,919
|
Apex Programming Cor to ramp up on power restoration
So my overflow seems to not like the COR coming on all at once. My herbie runs nice and silent. restores full syphon on a power reset. But the overflow overfills when I hit it all at once with 100% on my return. If I hut it with 50% for a few minutes then change it so 100% its fine.
I wanted to program my Apex to use a profile to ramp it up over 5 minutes. I got that part. But when I program it in my return shuts off. Here is my current programming and what I think I need to add Fallback 100 Set 100 If Output DT_Maint = ON Then OFF If LEAK_D CLOSED Then OFF If LEAK_F CLOSED Then OFF Using a profile called "Ramp_Up set to ramp it from 50% to 100% over 5 minutes I am trying this: Fallback 95 Set 95 ir power apex ON then Ramp_up If Output DT_Maint = ON Then OFF If LEAK_D CLOSED Then OFF If LEAK_F CLOSED Then OFF But when I do this the pump shuts off...
__________________
MHG (LIRA Member) 60G Cube, Kessil 360's |
06/06/2018, 03:32 AM | #2 | |
Ver. 2.1
Join Date: Mar 2005
Location: Rehoboth, MA
Posts: 1,803
|
Quote:
__________________
Pete "I never make mistakes... I thought I did once, but I was wrong" Current Tank Info: In the process - http://reefcentral.com/forums/showthread.php?t=2661614 |
|
06/06/2018, 04:26 AM | #3 |
Registered Member
Join Date: Mar 2015
Location: Upstate NY
Posts: 5,313
|
It's my understanding, unless they changed it in the new apex, your set and fallback statements are only on or off statements, or a profile name, not a percentage to run things at.
programming for one of my PH if it gives you any idea. Day_Wave_R, N_Wave, and Export are all profiles I setup in the classic dashboard. Set Day_Wave_R If Time 17:59 to 06:59 Then N_Wave If Output NutrientExport = ON Then Export If FeedA 005 Then OFF
__________________
80G SCA Build: http://reefcentral.com/forums/showthread.php?t=2560256 Originally posted by der_wille_zur_macht: "He's just taking his lunch to work" Last edited by homer1475; 06/06/2018 at 04:32 AM. |
06/06/2018, 04:57 AM | #4 | |
Registered Member
Join Date: Feb 2011
Posts: 2,919
|
Quote:
__________________
MHG (LIRA Member) 60G Cube, Kessil 360's |
|
06/06/2018, 05:00 AM | #5 | |
Registered Member
Join Date: Feb 2011
Posts: 2,919
|
Quote:
Set Ramp_Up But I need to wait till I get home tonight to try that.
__________________
MHG (LIRA Member) 60G Cube, Kessil 360's |
|
06/06/2018, 05:09 AM | #6 | |
Ver. 2.1
Join Date: Mar 2005
Location: Rehoboth, MA
Posts: 1,803
|
Quote:
I wasn't talking about the profile name but instead of: If power apex ON then Ramp_up You have: ir power apex ON then Ramp_up
__________________
Pete "I never make mistakes... I thought I did once, but I was wrong" Current Tank Info: In the process - http://reefcentral.com/forums/showthread.php?t=2661614 |
|
06/06/2018, 05:42 AM | #7 |
Registered Member
Join Date: Feb 2011
Posts: 2,919
|
Sorry, yes the "ir" is a typo in the post. An Apex would never allow you to upload a command like that.
__________________
MHG (LIRA Member) 60G Cube, Kessil 360's |
06/06/2018, 05:43 AM | #8 | |
Registered Member
Join Date: Mar 2015
Location: Upstate NY
Posts: 5,313
|
Quote:
As I don't have the COR pump I was not aware of that change. Just read the user manual for the COR pump. I think I would still use the set command with a profile name. Also unless thats a typo(fusion should tell you the syntax is incorrect)IR should be IF as member no 1 pointed out.
__________________
80G SCA Build: http://reefcentral.com/forums/showthread.php?t=2560256 Originally posted by der_wille_zur_macht: "He's just taking his lunch to work" |
|
06/06/2018, 05:45 AM | #9 |
Registered Member
Join Date: Mar 2015
Location: Upstate NY
Posts: 5,313
|
I would change this:
Fallback 95 Set 95 if power apex ON then Ramp_up If Output DT_Maint = ON Then OFF If LEAK_D CLOSED Then OFF If LEAK_F CLOSED Then OFF To this: Fallback 95 Set Ramp_up If Output DT_Maint = ON Then OFF If LEAK_D CLOSED Then OFF If LEAK_F CLOSED Then OFF
__________________
80G SCA Build: http://reefcentral.com/forums/showthread.php?t=2560256 Originally posted by der_wille_zur_macht: "He's just taking his lunch to work" |
06/07/2018, 05:24 PM | #10 |
Registered Member
Join Date: Feb 2011
Posts: 2,919
|
So it is a simple "Set Ramp_up" is all it took... Thanks all for the suggestions.
__________________
MHG (LIRA Member) 60G Cube, Kessil 360's |
|
|