Extremely Noisy Tunze ATO

FishyKat · 02/17/2019, 08:19 AM

I have a Tunze ATO (Tunze USA 3152.000 Automatic Top off Nano Osmolator) that will not stop spinning its propellers every 5 seconds. It still works as it should but its extremely loud- anyone have any ideas how I can stop it? I tried cleaning, checking for bubbles.. its 3 months old.

The sellers on amazon is of no help and I went to the manufacturer with no response at all.

Vinny Kreyling · 02/17/2019, 08:54 AM

Kat.
Try the Tunze forum here on RC.
Roger is very current with it & usually responds with great advise.

slief · 02/18/2019, 05:05 PM

If the ATO is turning on every few minutes, I can’t help but wonder if your sump level is either changing due to your drains or if the area where you have the level sensor is turbulent. That or you just have a lot of evaporation. As for noise. That is kind of subjective. I ran a Tunze ATO on another tank in the past. They are absolutely bullet proof pumps but they aren’t silent. While I wouldn’t call them noisy, other might. Like I said, noise is subjective and without hearing your pump, it’s impossible to tell you that you have a noisy pump or if the noise you hear is normal. That said, as Vinny mentioned, Roger from Tunze USA is very resonsive. You could post in the Tunze sponsor forum or even PM him.

Here is a trouble shooting guide for the Osmolator. It might address your issue.
http://www.reefcentral.com/forums/sh....php?t=2003291

And here is Rogers profile. You can click on contact info and send him a PM.
http://www.reefcentral.com/forums/member.php?u=787

02/17/2019, 08:19 AM	#1
FishyKat Registered Member Join Date: Jul 2016 Location: Long Island, NY Posts: 371	Extremely Noisy Tunze ATO I have a Tunze ATO (Tunze USA 3152.000 Automatic Top off Nano Osmolator) that will not stop spinning its propellers every 5 seconds. It still works as it should but its extremely loud- anyone have any ideas how I can stop it? I tried cleaning, checking for bubbles.. its 3 months old. The sellers on amazon is of no help and I went to the manufacturer with no response at all. __________________ No More Nanos! http://www.reefcentral.com/forums/showthread.php?t=2590548 Current Tank Info: 75 Gal Reef

02/17/2019, 08:54 AM	#2
Vinny Kreyling Registered Member Join Date: Nov 2002 Location: Miller Place, NY Posts: 7,206	Kat. Try the Tunze forum here on RC. Roger is very current with it & usually responds with great advise. __________________ 250 gallon mixed reef, 2 Reefbreeder's Photon V 2, Deepwater BLDC 12, DAS EX-3 Skimmer, MTC mini cal, 2-3/4" Sea Swirls, Aquacontroller & 6 Tunze pumps.

02/18/2019, 05:05 PM	#3
slief RC Sponsor Join Date: Sep 2009 Posts: 14,173	If the ATO is turning on every few minutes, I can’t help but wonder if your sump level is either changing due to your drains or if the area where you have the level sensor is turbulent. That or you just have a lot of evaporation. As for noise. That is kind of subjective. I ran a Tunze ATO on another tank in the past. They are absolutely bullet proof pumps but they aren’t silent. While I wouldn’t call them noisy, other might. Like I said, noise is subjective and without hearing your pump, it’s impossible to tell you that you have a noisy pump or if the noise you hear is normal. That said, as Vinny mentioned, Roger from Tunze USA is very resonsive. You could post in the Tunze sponsor forum or even PM him. Here is a trouble shooting guide for the Osmolator. It might address your issue. http://www.reefcentral.com/forums/sh....php?t=2003291 And here is Rogers profile. You can click on contact info and send him a PM. http://www.reefcentral.com/forums/member.php?u=787 __________________ Director Customer Support Royal Exclusiv USA For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745 Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476