Weld on 16

Milfordguy · 05/31/2014, 07:32 PM

Does anyone have weld on 16? I have almost a full tube somewhere, but have literally spent the last 3 hours tearing my house apart.

I took my skimmer out in order to re-seal a crack. I figured I would have it back in by tomorrow once the weld on was fully set.

If anyone has some I can borrow (I literally need maybe .5 ounces) I can pay you, or give you a frag of something.

Thanks,
Reggie

rogergolf66 · 05/31/2014, 07:42 PM

if I can find it. I have a tube

Milfordguy · 05/31/2014, 07:52 PM

Okay thanks Roger, let me know if you find it. I'm not exaggerating I completely cleared out 3 rooms in my house and re-arranged them without any luck finding it.

aguila88psi · 05/31/2014, 08:58 PM

I have some but I'm in Tampa

rogergolf66 · 06/01/2014, 05:19 AM

I found it but I don't have much left. U can have it I just hope its enough

Milfordguy · 06/01/2014, 11:07 AM

Well after looking for all that time yesterday, I woke up this morning and found it after looking for 3 minutes. Thanks everyone!

Now my question, is there anything I should do since I won't have my skimmer running for the next 2 days?

rogergolf66 · 06/01/2014, 11:33 AM

Good.

Feed less and change filter sock everyday

Milfordguy · 06/01/2014, 05:36 PM

Okay that's what I was thinking. I don't run a sock, but I may throw them in for the next few days.

One more question. Does anyone know if this should be sealed? I don't think it should be, so that you can disassemble the skimmer for cleaning. Any thoughts?

rogergolf66 · 06/01/2014, 05:44 PM

Nope don't seal that with weldon

Milfordguy · 06/01/2014, 06:23 PM

Okay that's what I thought thanks Roger!

rogergolf66 · 06/01/2014, 06:46 PM

Anytime

05/31/2014, 07:32 PM	#1
Milfordguy Registered Member Join Date: Jul 2013 Posts: 295	Weld on 16 Does anyone have weld on 16? I have almost a full tube somewhere, but have literally spent the last 3 hours tearing my house apart. I took my skimmer out in order to re-seal a crack. I figured I would have it back in by tomorrow once the weld on was fully set. If anyone has some I can borrow (I literally need maybe .5 ounces) I can pay you, or give you a frag of something. Thanks, Reggie

05/31/2014, 07:42 PM	#2
rogergolf66 im an addict lol Join Date: Jul 2006 Location: Land o lakes, FLorida Posts: 12,930	if I can find it. I have a tube __________________ Goal levels: salinity 35ppt, temp 78-79, alk 8-9, cal 430-450, mag 1310-1400 po4 .03, no3 1-3 Current Tank Info: System 1... 100 gal Zoa tank I built, 30 gal Ric Yuma shroom tank, 30 gal mix tank my sons,40 gal softie tank, 40 gal nem tank, two 40 gal LPS tank. System 2... 240 gal SPS display attached 100 gal frag SPS only tank.

05/31/2014, 08:58 PM	#4
aguila88psi Zoa Addict Join Date: Jul 2012 Location: Phoenix Posts: 2,756	I have some but I'm in Tampa __________________ Pedro R. Current Tank Info: work in progress

06/01/2014, 05:19 AM	#5
rogergolf66 im an addict lol Join Date: Jul 2006 Location: Land o lakes, FLorida Posts: 12,930	I found it but I don't have much left. U can have it I just hope its enough __________________ Goal levels: salinity 35ppt, temp 78-79, alk 8-9, cal 430-450, mag 1310-1400 po4 .03, no3 1-3 Current Tank Info: System 1... 100 gal Zoa tank I built, 30 gal Ric Yuma shroom tank, 30 gal mix tank my sons,40 gal softie tank, 40 gal nem tank, two 40 gal LPS tank. System 2... 240 gal SPS display attached 100 gal frag SPS only tank.

06/01/2014, 11:33 AM	#7
rogergolf66 im an addict lol Join Date: Jul 2006 Location: Land o lakes, FLorida Posts: 12,930	Good. Feed less and change filter sock everyday __________________ Goal levels: salinity 35ppt, temp 78-79, alk 8-9, cal 430-450, mag 1310-1400 po4 .03, no3 1-3 Current Tank Info: System 1... 100 gal Zoa tank I built, 30 gal Ric Yuma shroom tank, 30 gal mix tank my sons,40 gal softie tank, 40 gal nem tank, two 40 gal LPS tank. System 2... 240 gal SPS display attached 100 gal frag SPS only tank.

05/31/2014, 07:52 PM	#3
Milfordguy Registered Member Join Date: Jul 2013 Posts: 295	Okay thanks Roger, let me know if you find it. I'm not exaggerating I completely cleared out 3 rooms in my house and re-arranged them without any luck finding it.

06/01/2014, 11:07 AM	#6
Milfordguy Registered Member Join Date: Jul 2013 Posts: 295	Well after looking for all that time yesterday, I woke up this morning and found it after looking for 3 minutes. Thanks everyone! Now my question, is there anything I should do since I won't have my skimmer running for the next 2 days?

06/01/2014, 05:36 PM	#8
Milfordguy Registered Member Join Date: Jul 2013 Posts: 295	Okay that's what I was thinking. I don't run a sock, but I may throw them in for the next few days. One more question. Does anyone know if this should be sealed? I don't think it should be, so that you can disassemble the skimmer for cleaning. Any thoughts?

06/01/2014, 05:44 PM	#9
rogergolf66 im an addict lol Join Date: Jul 2006 Location: Land o lakes, FLorida Posts: 12,930	Nope don't seal that with weldon __________________ Goal levels: salinity 35ppt, temp 78-79, alk 8-9, cal 430-450, mag 1310-1400 po4 .03, no3 1-3 Current Tank Info: System 1... 100 gal Zoa tank I built, 30 gal Ric Yuma shroom tank, 30 gal mix tank my sons,40 gal softie tank, 40 gal nem tank, two 40 gal LPS tank. System 2... 240 gal SPS display attached 100 gal frag SPS only tank.

06/01/2014, 06:23 PM	#10
Milfordguy Registered Member Join Date: Jul 2013 Posts: 295	Okay that's what I thought thanks Roger!

06/01/2014, 06:46 PM	#11
rogergolf66 im an addict lol Join Date: Jul 2006 Location: Land o lakes, FLorida Posts: 12,930	Anytime __________________ Goal levels: salinity 35ppt, temp 78-79, alk 8-9, cal 430-450, mag 1310-1400 po4 .03, no3 1-3 Current Tank Info: System 1... 100 gal Zoa tank I built, 30 gal Ric Yuma shroom tank, 30 gal mix tank my sons,40 gal softie tank, 40 gal nem tank, two 40 gal LPS tank. System 2... 240 gal SPS display attached 100 gal frag SPS only tank.