Reef Central Online Community

Go Back   Reef Central Online Community > Sponsor Forums > SaltWaterAquarium.com
Blogs FAQ Calendar Mark Forums Read

Notices

User Tag List

Reply
Thread Tools
Unread 11/29/2017, 10:33 AM   #1
SaltwaterAq
RC Sponsor
 
SaltwaterAq's Avatar
 
Join Date: Nov 2013
Posts: 140
Waveline WavePuck II IN STOCK!

In stock and Shipping NOW!
https://www.saltwateraquarium.com/waveline-wavepuck-ii-aquairum-flow-pump-waveline/



Max Flow 3,000gph | 30~3 watts | 25-150+ gallons

Includes pump, power supply, 0-10v cable and multi-function controller.
Applicable for glass or acrylic aquariums up to 3/4 in thick.

Compact & Controllable Water Movement

Generates a 30in Wide and Gentle Flow Pattern
Directional Water Flow
Energy Efficient
Quiet Opperation
0-10v Advanced System Control
No Hassle Installation
Magnetic Articulating Magnetic Mount

The new Waveline WavePuck is a fully controllable flow pump that moves up to 3000gph and consumes no more than 30 watts of power in the process. The broad flow water movement will encourage coral growth instead of blasting it away with harmful "hot spots" associated with other wave pumps.

Get Flow Where You Need it the Most
With it's unique articulating magnetic mount, the WavePuck can easily get the flow precisely where you need it. The rear of the WavePuck has a convex rounded shape which fits neatly into a concave mounting magnet, allowing the pump assembly to gyrate in any direction. The WavePucks's low-profile magnetic mount offers a 25 degree range of motion and the entire pump is capable of rotating 360 degrees!

Multi-Function Controller
The WavePuck Multi-Function Controller allows you to create pulsing or surge effects with its easy to set waveline mode as well as the expected feed mode. Simply set your desired max power/flow setting and its on and off power cycles. You can also set the pump run time to facilitate night mode by shutting the pump down till the run time resumes.

Advanced VDM WavePuck Control
For all those that desire more control, the WavePuck can link up to most 3rd party controllers by using an available 0-10 volt port. This makes the pump very versatile and almost universally compatible with most system controllers including the APEX by Neptune Systems or the Reef Angel among others.

WavePuck Specifications
AC Adapter: Input: A.C. 100~240V, 50/60Hz; Output: DC 24V, 1.5A
Max Power: 30W
Max Flow: 3000gph (1100LPH)
Size: 3in x 2.8in (DxH)
Cable Length: 10.5ft (from pump to controller)
Max Mounting Width: 3/4in


__________________
Shop Now! SaltwaterAquarium.com
Phone 888-700-1012 - Text 717.408.8337
SaltwaterAq is offline   Reply With Quote
Unread 11/29/2017, 11:29 AM   #2
Cosmik1
Registered Member
 
Cosmik1's Avatar
 
Join Date: Jul 2017
Posts: 24
Quote:
Originally Posted by SaltwaterAq View Post
In stock and Shipping NOW!
https://www.saltwateraquarium.com/waveline-wavepuck-ii-aquairum-flow-pump-waveline/



Max Flow 3,000gph | 30~3 watts | 25-150+ gallons

Includes pump, power supply, 0-10v cable and multi-function controller.
Applicable for glass or acrylic aquariums up to 3/4 in thick.

Compact & Controllable Water Movement

Generates a 30in Wide and Gentle Flow Pattern
Directional Water Flow
Energy Efficient
Quiet Opperation
0-10v Advanced System Control
No Hassle Installation
Magnetic Articulating Magnetic Mount

The new Waveline WavePuck is a fully controllable flow pump that moves up to 3000gph and consumes no more than 30 watts of power in the process. The broad flow water movement will encourage coral growth instead of blasting it away with harmful "hot spots" associated with other wave pumps.

Get Flow Where You Need it the Most
With it's unique articulating magnetic mount, the WavePuck can easily get the flow precisely where you need it. The rear of the WavePuck has a convex rounded shape which fits neatly into a concave mounting magnet, allowing the pump assembly to gyrate in any direction. The WavePucks's low-profile magnetic mount offers a 25 degree range of motion and the entire pump is capable of rotating 360 degrees!

Multi-Function Controller
The WavePuck Multi-Function Controller allows you to create pulsing or surge effects with its easy to set waveline mode as well as the expected feed mode. Simply set your desired max power/flow setting and its on and off power cycles. You can also set the pump run time to facilitate night mode by shutting the pump down till the run time resumes.

Advanced VDM WavePuck Control
For all those that desire more control, the WavePuck can link up to most 3rd party controllers by using an available 0-10 volt port. This makes the pump very versatile and almost universally compatible with most system controllers including the APEX by Neptune Systems or the Reef Angel among others.

WavePuck Specifications
AC Adapter: Input: A.C. 100~240V, 50/60Hz; Output: DC 24V, 1.5A
Max Power: 30W
Max Flow: 3000gph (1100LPH)
Size: 3in x 2.8in (DxH)
Cable Length: 10.5ft (from pump to controller)
Max Mounting Width: 3/4in
This pump sucks


Sent from my Nexus 6P using Tapatalk


Cosmik1 is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -6. The time now is 08:29 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2024 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright ©1999-2022
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.