|
11/25/2019, 10:09 PM | #1 |
Registered Member
Join Date: Aug 2019
Posts: 441
|
Tank stand help - which option?
I purchased a tank stand and am.. concerned about its capability. Previous owner claimed he kept a fully stocked FW tank on it. Complicating matters more the sump doesn’t even fit - I should have brought a measuring tape with me. I’m considering cutting the middle support and then dropping in the sump and putting a new piece of wood in. Do you guys have any input? Here are some pics of the stand
I’m concerned about it holding the tank since it looks like it has minimal support. IMG_1142.jpg IMG_1144.jpg IMG_1141.jpg I started building my own stand but was concerned about it being sturdy - here’s the link to the stand I was making https://youtu.be/8LQhrHyX-kM Do you guys have any input? I don’t know which one to go with - and this is a pretty important decision. I see petco sells a stand but it looks like it has 4 individual legs so I’m avoiding that so I don’t damage my flooring. Sent from my iPhone using Tapatalk |
11/25/2019, 10:18 PM | #2 |
Registered Member
Join Date: Sep 2019
Posts: 92
|
Looks like same stand I have in my 90 gallon. Not sure I would cut out the center support though, I had to remove it to get my sump in but then reattached it. If I would do it again I would build my own to get more room underneath.
Sent from my iPhone using Tapatalk |
11/25/2019, 10:29 PM | #3 | |
Registered Member
Join Date: Aug 2019
Posts: 441
|
Quote:
Did you have any issues after reattaching it? I wasn’t clear - my plan is to reattach it once the sump is dropped in. I’m not entirely sure how I’ll do it yet Sent from my iPhone using Tapatalk |
|
11/26/2019, 05:45 AM | #4 |
Registered Member
Join Date: Sep 2019
Posts: 92
|
Lol . . . Not yet!
Sent from my iPhone using Tapatalk |
11/26/2019, 09:02 AM | #5 |
Registered Member
Join Date: Apr 2016
Location: Central Nebraska
Posts: 3,190
|
Looks like a standard All-Glass stand. Made with 1xs, it is definitely strong enough. Folks that build their own with 2x4s are overdoing it to compensate for their carpentry skills.
Yes, you can remove the brace to get the sump in. Just put it back after you're done.
__________________
Pat Current Tank Info: 125 in-wall , 40b sump. 6 bulb T5. ASM G2 skimmer. LPS and leathers |
11/26/2019, 09:09 AM | #6 | |
Registered Member
Join Date: Sep 2003
Location: North Carolina
Posts: 20,050
|
Quote:
__________________
Who me? |
|
11/26/2019, 09:12 AM | #7 | |
Registered Member
Join Date: Aug 2019
Posts: 441
|
Quote:
Thank you! I didn’t know that the 2x4s were overcompensation - that’s why the new stand seemed so sketchy because it’s so thin. Sent from my iPhone using Tapatalk |
|
11/26/2019, 09:30 AM | #8 |
Registered Member
Join Date: Apr 2008
Location: Grove City, Ohio
Posts: 10,806
|
You can easily remove the center support to place the sump. What I would do is remove the support in front, not on top, and then make a new one out of readily available 1x3 or 4 from HD. Attach it using pocket hole screws so that if the need arises, you can remove the new support in the future.
__________________
I'll try to be nice if you try to be smarter! I can't help that I grow older, but you can't make me grow up! Current Tank Info: 120 mixed reef with 40b sump, RO 150 skimmer, AI Sol Blue x 2, and a 60g Frag Tank with 100g rubbermaid sump. 2 x Kessil A360w lights, BM curve 5 skimmer |
12/06/2019, 09:47 AM | #9 |
Registered Member
Join Date: Sep 2019
Posts: 19
|
I had the same issue with my last stand, just pry the top middle board going across and put your sump in and place the board back on. It's resting on the support so it doesn't have to be nailed back in, just make sure it's level.
|
|
|