|
02/18/2018, 09:28 PM | #1 |
Registered Member
Join Date: Jan 2007
Location: menifee So cal
Posts: 11,042
|
Kessil 160 + Spectral Controller = Flicker
So I have been using my Kessil 160 for years with no problems. I simply use a on/off light times. So I decided to get a new Spectral Controller. So I programmed the controller at my desk in front of my computer. Mounted the controller and then plugged in the Unit link cable.
Right away the light started to flicker, so I unplugged the Unit Link cable and the the light kept flickering. Any ideas on what happened and if it damaged the light? Thanks in advance |
02/18/2018, 09:34 PM | #2 |
Registered Member
Join Date: Apr 2013
Posts: 1,793
|
Flickering at too low of a dimming % was/is apparently common for Kessils..
https://forum.neptunesystems.com/sho...sil-Flickering https://www.*********.com/threads/ke...oblems.306303/ Though this is really Apex info.. Doubt if you damaged it but got to get it back up to past 15% Just a thought.. |
02/18/2018, 09:47 PM | #3 |
Registered Member
Join Date: Jan 2007
Location: menifee So cal
Posts: 11,042
|
I will reprogram the light and see if if improves. It read 35% on the controller.
|
|
|