|
03/04/2018, 01:36 PM | #1 |
Registered Member
Join Date: May 2011
Location: Wildomar, CA
Posts: 1,112
|
Controlling skimmer micro bubbles
My NYOS 160 skimmer has been running for about 2 weeks now. I’ve been tuning it but can’t get rid of all the micro bubbles in the skimmer section which make it to the return section through the foam and then into the tank.
Does anyone have experience with this?
__________________
Ok,.... Now it's turning into an obsession Current Tank Info: Red Sea Reefer 750 XXL, Red Sea 170 Last edited by Raptor72; 03/04/2018 at 01:44 PM. |
03/04/2018, 06:45 PM | #2 |
Registered Member
Join Date: Sep 2003
Location: North Carolina
Posts: 20,050
|
Sometimes they can take a while to break in and stop producing bubbles like that....do you not have a sufficient bubble trap baffle setup
__________________
Who me? |
03/04/2018, 06:56 PM | #3 |
Registered Member
Join Date: May 2011
Location: Wildomar, CA
Posts: 1,112
|
Yes, it’s on a Red Sea 750. The baffles and foam but as much as the skimmer is producing they still get by.
__________________
Ok,.... Now it's turning into an obsession Current Tank Info: Red Sea Reefer 750 XXL, Red Sea 170 |
03/04/2018, 07:29 PM | #4 |
Registered Member
Join Date: Feb 2006
Location: WEST ALLIS ,WI
Posts: 922
|
might be still breaking in...
|
04/20/2018, 05:57 PM | #5 |
Registered Member
Join Date: Sep 2008
Location: Perth, Western Australia
Posts: 26
|
I have a Red Sea 625 and have been running a nyos 160 for a few days now. I don't have any bubbles getting through the baffle. I'm guessing your water level is too high.
|
Thread Tools | |
|
|