|
![]() |
|
|
#1 |
|
Registered Member
Join Date: Nov 2011
Location: Lithia, Florida
Posts: 31
|
NILUS two channel configuration
On the new NILUS, which configuration is correct?
a) White Wave controls all the LEDs (white, blue, red and UV) except four blue moonlight LEDs which are controlled by the Blue Wave b) White Wave controls all 30 white LEDs and the Blue Wave controls the 22 blues, 4 reds and 4 UVs. c) Something else. If c) then please explain the configuration. |
|
|
|
|
|
#2 |
|
RC Sponsor
![]() Join Date: Sep 2011
Location: International
Posts: 72
|
Choice A.
The white wave on the controller is the daylight cycle and controls 56 LEDs consisting of white, blue, UV and red. The Blue wave controls the 4 blue moonlight LEDs. Thanks for the question. |
|
|
|
|
|
#3 |
|
Registered Member
Join Date: Nov 2011
Location: Lithia, Florida
Posts: 31
|
Thanks for the answer!
Sorry I had to ask but the Orphek site and the timer programming videos are kinda vague is this respect. |
|
|
|
|
|
#4 |
|
RC Sponsor
![]() Join Date: Sep 2011
Location: International
Posts: 72
|
We appreciate the feedback on the videos. We will work to be clearer in this point in the next series of videos.
|
|
|
|
![]() |
| Thread Tools | |
|
|