|
12/31/2015, 01:18 AM | #1 |
Registered Member
Join Date: Nov 2015
Posts: 16
|
Here's my story of my first 12 hours with my APEX.
In 37 years of life, this is the most amazing disaster of a product installation that I've ever seen. Nothing works. They'll drown you in instructions, but none make sense and almost all include out of date instructions and dead links. *
I hope Neptune reads this so I can act as their quality assurance and they can hunt down all of these stupid issues and fix them for the suckers who unknowingly spend a small fortune on this horrible in the future.* So, my story starts with me opening the boxes and carefully reading through everything.*I read that I need to hardwire for the firmware update, so I do. Not that it needed updated, so there was a wasted 3 trips up and down the stairs to hardwire.* One of the first steps is to create an account. Ok, but it's not that easy. You set it up, then it opens 2 get started guides, emails you another get started guide and a link to another one or two. By the time I'm in my dashboard, I have 5 get started guides open, each telling me something different to do. Where do I go? I have no clue. I guess I'll pick one and hope it is the right move.* Maybe let's get it networked up. Wireless game adapter as recommended in the manual: connects immediately, but guess what? No Comm by the Apex. Over and over, every 45 minutes. I was able to adjust the DNS setting to get it to work, but every once in a while, I have to go back to DHCP on, then DHCP off, adjust DNS again and it'll connect. A colossal waste of time because the settings don't seem to hold.* Well, now that I know the little routine to get it connected, let's continue. It tells me that I need to calibrate the pH probe. Cool, it says instructions will be on-screen. Failed to calibrate.*Failed to calibrate.*Failed to calibrate. ***? I go to YouTube and find a 5 minute user video that does 1000x better at explaining it. Oh, the instructions leave out the fact that you have to rinse the probe with RODI water before and between the calibrations AND wait about a minute for each calibration to level. Kind of key info left out of both the set-up guide and on-screen instructions.* Now, let's calibrate the salinity (conductivity probe). Oh, I need a second temp probe? ***? I guess that's another $30 to spend on top of the $1,200 I've already dropped on this. Oh, I can move forward without it for now, so I'll do that. Control solution? Where's that? Oh, it didn't come with it. ***? I mean, it HAS to have it to calibrate, so maybe include it? I guess I'll order some from BRS. Oh, they are out of stock. Great... Well, let's keep moving now. At least I can get my system set up with the automation and stuff. Let's start with the Radion lights and my WXM module. Instructions: Go into Configuration on the top of the WebInterface...except there is no "WebInterface" except for Fusion and it has no "Configuration at the top". After 30 minutes of searching I find: http://neptunesystems.freshdesk.com/...e-radion-setup. It has the most ghetto instructions. Log out of EcoSmart Manager, download a new one ONLY at this link...except the link is dead for Mac. Ok, I'll use my Windows PC to do it. I download it, follow the instructions, until it says to plug in direct to the Radions and select "Factory Reset" from "USB Radions" and "USB Radions" is grayed out. Why? because they require you to login first and that page specifically says not to login. Again, ***?* You know what? Screw this. I'll move on to my EcoTech Vectra M1 pump. What?!?!?!?! It's not compatible with Apex?****!!!!! I guess I'll head over to ReefCentral to see if they can help before I give up on this. Oh, an Apex new user guide made by users. Perfect. Link dead. Site frozen. You have to be kidding me.* So, nothing works, nothings compatible, ALL of the instructions are outdated, everything is SOOOOOO over complicated. Why did I spend $1,200 on this?* Unless someone can give me a really, really good reason that I haven't considered to keep this thing, It's getting packed up and returned tomorrow. I feel bad for the LFS guy that he's going to lose a $1,200 sale and have to take back a bunch of open stuff, but I have no idea why anyone would spend the money on this. I'll get a Reef Link for my EcoTech stuff and I have a Seneye Reef. I'll get a dosing pump other than DOS that's 1/2 the price and will dose 5 things instead of 2. My big loss? I'll have to hit 3 different buttons each time I feed my fish. I'm really not sure why I even bought this POS in the first place.* I think all the love Apex gets online is some strange self justification for the pain and agony of the setup. If you talk about how great it is, then you actually feel like it was worth that waste of 2 days going in circles setting it up.* |
12/31/2015, 01:46 AM | #2 |
Registered Member
Join Date: Sep 2014
Location: Tujunga, CA
Posts: 1,443
|
Well, it didn't take us 2 days to get mine set up and has saved my tank from potentially crashing 3 times in the last year so yes, any difficulties have been worth it. (Once when a hood fan disconnected and the lights raised the tank temp too high, and twice when the kalk-saturated ATO started dumping too much kalk into the tank.)
Suggestion: If you encounter problems, post in the Neptune forum here on RC and also the forums that Neptune hosts. Any time we've encountered a question on how to do something, if the answer wasn't already posted and answered then a post would get an answer pretty quickly. But don't give up on it just yet. It really is worth getting it set up and working. Once you're past this frustration and everything's been working for a while you'll be glad you did. It's worth having for much more than just feed cycles. Hang in there!
__________________
"Get a reef tank!" they said. "It'll be relaxing!" they said. 65g mixed reef, 30g display fuge, 20L sump/pod fuge, ATI 4x24 + 2 Kessil A360NEs, Aquamaxx EM100, Gyre 130 |
12/31/2015, 02:13 AM | #3 |
Registered Member
Join Date: Jul 2012
Location: St. Paul, Minnesota
Posts: 111
|
It is a huge headache to start up, but with help from member close to you, the forum on the neptune site, and LOTS of reading you'll figure it out.
I wouldn't even think of having a tank without an apex now that I've used one. I had so many mistakes with temp, ATO, and other things before I had my apex. Now everything is automated and works together. My best help will be find someone close to you that has one running to help you. I was pulling my hair out for hours one night till a friend of mine showed up an hour or two with him everything was working perfect. Don't give up, good luck! |
12/31/2015, 02:16 AM | #4 |
Registered Member
Join Date: Mar 2015
Location: Upstate NY
Posts: 5,313
|
Took me all of an hour to get setup. Then another 3 or 4 days to figure out the proper programming.
I don't know if I would ever do another SW tank without one. Its saved my tank twice in a little over a year, once when a heater failed, and seco d time when a dosing pump got stuck on. The apex cut the doser when my PH shot up.
__________________
80G SCA Build: http://reefcentral.com/forums/showthread.php?t=2560256 Originally posted by der_wille_zur_macht: "He's just taking his lunch to work" |
12/31/2015, 04:39 AM | #5 |
Registered Member
Join Date: Apr 2002
Posts: 196
|
If I was you I would pack it up and send it back. It's obviously more work than you are willing to invest to learn how to use it.
|
12/31/2015, 05:31 AM | #6 |
Registered Member
Join Date: Oct 2014
Location: North Georgia
Posts: 869
|
We struggled too, and struggled and struggled.
We did spend a lot of time on forums and eventually on the phone with Apex. A huge part of our problem were components that did not want to readily communicate with one another (Radions for example). I will agree that for as much money as we invest in Apex (and don't get me wrong, I am a HUGE fan) building them wireless ready seems a little obvious. I fear that there are bigger problems ahead, however, as Apex and EcoTech try to work out (or not) their differences over compatibility. Apex could be easier to set up but it in my opinion it is an invaluable tool for reef keeping. Good luck! |
12/31/2015, 06:03 AM | #7 | |
oxygen abuser
|
Quote:
__________________
-Mike Tankless wonder Geaux Noles! |
|
12/31/2015, 06:27 AM | #8 |
Registered Member
Join Date: Sep 2011
Location: Northern Virginia
Posts: 1,147
|
I had no problems at all. It took me a max of 2 hours to set up and run and that includes the wireless gaming device (same one they recommend). The device needs a clear line of sight for signal connection. This gave me a bit of a problem but that's because the router is upstairs in the most furthest room away and the tank is in the basement. I would agree that better steps/instructions would help with the probe calibrations. But overall, I'm completely satisfied with it.
__________________
Jim Current Tank Info: SCA 150G, 5 inch sand bed, 2 Tunze 6095s, ReefBreeders v2+ 50" with 2 all Blue Reefbrites, and Continuous Water Change System |
12/31/2015, 07:20 AM | #9 |
Registered Member
Join Date: Oct 2011
Location: Damascus, MD
Posts: 3,340
|
I never hear of these problems with Digital Aquatics (ReefKeeper). But I do hear about them with Apex.
Don't give up on it yet, just call them and work it out. System computers are very useful. I am still waiting for someone to make an Arduino setup so we can bypass all of these seriously overpriced systems like Apex and D/A sell.
__________________
125RR in-wall, 40B Sump, CS180 BM Skimmer, ATI 4x80 watt, eheim 1262, custom wrap around rock wall, ReefKeeper Elite 120g in-wall, 40B Sump, PC 54wx4, Jabao DC-6000 (full siphon), future seahorse t Current Tank Info: 125g, 120g, 2x40b sumps, ATI 4x80 T5HO |
12/31/2015, 07:37 AM | #11 |
Registered Member
Join Date: Mar 2015
Location: NW Iowa
Posts: 8,823
|
The biggest problem the OP has is he was using a MAC computer
__________________
Previous tanks: 200 gal fowlr 9" Emperor Angel and many different butterfly fish 4" maroon clown and several other fish, 50 gal sump, 40 gal mixed reef/fish mostly softies and LPS. Current Tank Info: 40b 750 gph 45 lbs lr, 2"-3" sand, 165w full spectrum dimable LED, 20 gal sump/refugium 30 lbs lr, Bak Pak 2 skimmer, 4" sock temp 79-80, sg 1.026, NH3 0, NO2 0, NO3 <10, ph 8.2, calc 400, mag 1300 |
12/31/2015, 08:01 AM | #12 |
Registered Member
Join Date: Nov 2015
Location: Canada
Posts: 387
|
Good grief.......life is so hard.
|
12/31/2015, 08:06 AM | #13 | |
12-5 Chiefs record
Join Date: Mar 2010
Location: NW Iowa
Posts: 10,134
|
Quote:
__________________
75 gal. mixed DT, 100 gal. sump, 50 gal. fuge, Clownfish breeder |
|
12/31/2015, 08:15 AM | #14 |
Moved On
Join Date: Aug 2010
Location: Mankato, MN
Posts: 382
|
|
12/31/2015, 09:16 AM | #15 |
Registered Member
Join Date: Jan 2014
Location: VA/DC/MD
Posts: 299
|
When you bought your first computer until now, werent there many times you were just as frustrated? Did you just throw it down and stomp out of the room and say "OMG, like, I'm never touching that thing again! That's the worst purchase I've ever made." Judging by your post I'm betting you have. Multiple times. But yet, here you are, using the computer. Why? Because computers have made their way into people's lives as a necessity. It helps them in everyday life more than they can comprehend.
The APEX is a computer, and it helps people who understand that just as much. This thing isn't just going to fall out of the box, roll over to an outlet and plug itself in and start working, it needs to be set up. Is it hard? That depends on your computer skill level and the willingness to learn. You chose one of the most difficult hobbies out there by deciding you wanted a reef tank. I don't think I need to go on about how much harder this is compared to keeping a cat. I can't imagine anyone who would think something like the APEX, the piece of equipment that controls all of the equipment would be anything shy from moderately difficult to set up for an average user. I love my APEX. It took me some time to get mine exactly where I want it. Hell, I may change some code around once a week. I would never even think about having another tank without one.
__________________
24X24X12 Mixed : T5 / 13UP lighting | Apex | MP10 | SCA-301 | WW/CW/UV Sump Lighting | DIY dosers 20L AIO SPS frag tank : UV/CW/WW/R/B/L/P LED - GONE |
12/31/2015, 09:24 AM | #16 |
Registered Member
Join Date: Apr 2013
Posts: 495
|
The fact that you payed $1200 for a system that didn't come with required calibration solution, screams f*** you from the manufacturer imo.
Salt |
12/31/2015, 10:03 AM | #17 |
Registered Member
Join Date: Dec 2015
Posts: 8
|
|
12/31/2015, 10:26 AM | #19 |
Registered Member
Join Date: Mar 2012
Location: Conway, AR
Posts: 2,117
|
I love my Apex but several things about their product are poorly done. Why in this day and age would you build a product that is not WiFi capable? Fortunately my house is on a crawl space and it was easy to hard wire mine to the router but if I was on a slab it would have been impossible.
I just bought a new pH probe. I too was surprised it came without any calibration fluid! Come on Neptune that is just ignorant. Add the price of the calibration fluid to what you are now selling the probe for but don't let one leave your warehouse without calibration fluid. Write instructions in simple steps and plain English. Don't assume every customer is a computer programmer/IT person. It's been about 3 years since I set mine up but I remember some of the frustrations the OP is going through. Why hasn't progress been made in that length of time. Great product but I think their lack of competition has made them fat, happy and less consumer friendly than they should be. Eventually someone is going to come along with a better mouse trap and their short comings are likely to bite them on the booty.
__________________
DSA 155,Custom Trigger 42" sump/refugium, MP40 X2, MP 10 X 2, AI Hydra 52 X3, Apex controller, Tunze ATO Current Tank Info: DSA 155 gallon, mixed reef, SPS and wrasse dominant |
12/31/2015, 10:36 AM | #20 | |
Registered Member
Join Date: Jul 2009
Location: Iowa
Posts: 9,671
|
Quote:
__________________
rebuild and recovery log: No more red house, you'll have to click on my name and visit my homepage! You can check out my parameters at reeftronics dot net website and look for my username. Current Tank Info: 180g mixed reef w/ a beananimal overflow to a dolomite RRUGF. | 20g long G. Smithii Mantis Tank |
|
12/31/2015, 10:46 AM | #21 |
Registered Member
Join Date: Feb 2013
Location: Baton Rouge, LA
Posts: 835
|
My Apex has made me want to rip my hair out (if my head wasn't shaved) more than once. Getting it set up, getting it wireless, getting it accessible outside my home network, getting text and email alerts setup......all of those things have a steep learning curve. I grew up building computers and networks so by no means was I oblivious to the task. It's just the nature of the beast. The one thing I will say is that once you get it up and running, I almost never have to change anything and it runs solid with no complaints. I love being able to "check" my tank when I'm away from home and I love that little extra security that my tank will alert me if it has an issue.
There are people before you that have something similar to your setup and they got it to work and there will be people after you. It might not be a "plug and play" type of thing but, then again, almost nothing in this hobby EVER is. Reefkeeping is a difficult and demanding mistress sometimes. Suck it up, find someone local who has experience with the Apex, invite them over to help you and then pay them in brews and pizza...that's what I'd do. Just to touch on a common theme, I too thought Apex should include calibration fluid with their setups/probes. The one thing I didn't consider is that the systems and probes are designed to be stored. Calibration fluid has an expiration date, if I'm not mistaken. How angry would you be if you bought a "brand new" Apex and calibrated your pH probe with expired fluid giving you a bad reading (unbeknownst to you)? I do think they should at least INFORM you but there are so many 3rd party sellers that this would be difficult to control.
__________________
I got a fever, and the only prescription is more pictures. |
12/31/2015, 12:28 PM | #22 |
Registered Member
Join Date: Nov 2015
Posts: 16
|
I will give Neptune credit for a super fast response and a very solid solution.
Paul emailed me first thing this morning and spent an hour and a half working through my issues. There were several that that didn't go as he thought they would, but he quickly found a way to resolve all of them. After seeing him go through it, I'm not surprised I had so many issues. There were a ton of things that you just needed to have done before or know the ins and outs of. Some of my solutions: He mentioned that their website and system relaunch was only in the last couple of weeks. They have some cleaning up to do of old guides and terminology, so I will accept that as a good reason. It does take time to transition sites and there are always some bugs to work out. The networking issue was being caused by a bad gateway setting within the Apex. I'll take blame for that one. He explained that they will update the instructions for the pH calibration. He said you don't need to use RODI water, but you do need to give them time to settle and it's not explained well enough. He offered to send me some salinity control solution at no cost, which is a nice gesture. The Radion issue was that my Radions didn't need updated. The guide I read didn't mention that Radions manufactured after 10/14 wouldn't need updated. The updated guide does state that. They then wouldn't sync, so we did a factory reset. Still no response, but he was able to get them to respond from his side. So, that was a welcome fix. He even took the time to copy my previous program over. He said that he hopes that EcoTech will work with them on the Vectra. I hope so as well, as I'll likely sell it on eBay if they don't. It's a very nice return pump and I don't look forward to losing money on the resell. He helped explain how to set up feeding timers. He then helped me set up my Gyre interface from IceCap. This was going above and beyond in my mind because that would have been a massive effort if I had done it, and it's not even an Neptune product. So, in the end, I very much appreciate the service and effort from Paul and Neptune. I really think they should offer this set-up service as an add-on or for Gold system buyers. It would be worth a lot of money to avoid the initial challenges that *can* present themselves. |
12/31/2015, 12:31 PM | #23 |
Registered Member
Join Date: Jul 2009
Location: Iowa
Posts: 9,671
|
That's pretty awesome. I noticed the Apex site is completely redesigned recently.
__________________
rebuild and recovery log: No more red house, you'll have to click on my name and visit my homepage! You can check out my parameters at reeftronics dot net website and look for my username. Current Tank Info: 180g mixed reef w/ a beananimal overflow to a dolomite RRUGF. | 20g long G. Smithii Mantis Tank |
12/31/2015, 12:34 PM | #24 | |
Registered Member
Join Date: Sep 2014
Location: Tujunga, CA
Posts: 1,443
|
Quote:
__________________
"Get a reef tank!" they said. "It'll be relaxing!" they said. 65g mixed reef, 30g display fuge, 20L sump/pod fuge, ATI 4x24 + 2 Kessil A360NEs, Aquamaxx EM100, Gyre 130 |
|
12/31/2015, 12:36 PM | #25 | |
Registered Member
Join Date: Jul 2009
Location: Iowa
Posts: 9,671
|
Quote:
__________________
rebuild and recovery log: No more red house, you'll have to click on my name and visit my homepage! You can check out my parameters at reeftronics dot net website and look for my username. Current Tank Info: 180g mixed reef w/ a beananimal overflow to a dolomite RRUGF. | 20g long G. Smithii Mantis Tank |
|
Tags |
apex, automation, controller, neptune |
Thread Tools | |
|
|