|
07/30/2009, 01:36 PM | #1 |
Registered Member
Join Date: Mar 2009
Location: Orange County CA
Posts: 204
|
Cant adjust asm output tube
I have an asm g3 and I cant seem to get the output tube to budge. The problem is the skimmer is in the sump, and in the tanks current location I cannot remove the skimmer. Has anyone had the output tube lock up? Any advice?
__________________
Click the house for my 120 build. Current Tank Info: 120g, 40g sump, 2x150W MH, ASM G3, MP40W |
07/30/2009, 01:49 PM | #2 |
Registered Member
Join Date: May 2009
Location: St. louis
Posts: 1,203
|
i have had this happen on my octo
just turn it off and wiggle in a cirlce and twist and pull up at the same time
__________________
GOT CRABS? Current Tank Info: 90gal RR,rock wall in progress, MRC sump, reef octopus XP2000I skimmer, marineland pro lighting 2-150w MH 4-54w T5's, hydor wavemaker with 2 #4 controllable pumps, and QuietOne 4000HH return pump. |
07/30/2009, 03:03 PM | #3 |
Registered Member
Join Date: Apr 2008
Location: Indianapolis
Posts: 2,447
|
+1
twist and pull up at same time.
__________________
120g DT 100lbs LR / 200 lbs LS, 45g fuge, VectraM1 Return, Herbie drain, 4x RW-8, 2x AI Hydra 26 w AWM, ASM G2, Apex controller, Apex BoB w floats ATO |
07/30/2009, 03:42 PM | #4 |
Registered Member
Join Date: Jul 2008
Location: Edmonton Alberta
Posts: 4,717
|
+1 you may have to push down on the skimmer and pull up on the riser tube.
__________________
----------------- Current Tanks: New 210 custom 84 x 24 x 24, 60g sump, SWC 250 extreme with bubble blaster 5000, 2 vortech mp40, 2 vortech mp10, 12 T5, Water blaster 5000, warner marine bio pellets, 60g clownfish cube, red carpet anemone with a 25g sump,SRO octopus 1000sss, 250w radium, lumenarc large. |
Thread Tools | |
|
|