|
04/22/2018, 05:56 AM | #1 |
Registered Member
Join Date: Nov 2009
Posts: 123
|
My double A1 prime led light
Just installed, 2 days ago over the new aquarium. I had to set up the tmer manually because for some reason my phone was not recognising my modem in my basement. It turns on when expected and shuts off according to my time request but the one side of the led stays on ever so slightly. Doesn't completely turn off, has a faint glow.
Any suggestions, thank you |
04/22/2018, 11:13 AM | #2 |
Registered Member
Join Date: Feb 2014
Posts: 1,765
|
Do you have a moonlight setting on that one? I would contact AI directly. They have good customer service.
__________________
“In wine there is wisdom; in beer there is freedom, in water there is bacteria.” - Benjamin Franklin Current Tank Info: 90 gallon reef. Biocube 29 lionfish tank. Mantis tank. |
04/22/2018, 03:45 PM | #3 |
Registered Member
Join Date: Nov 2017
Posts: 53
|
I don't know about the primes but my 26 glows a little because of the status light on the back of it when the lights are off.
|
04/23/2018, 06:12 AM | #4 |
Registered Member
Join Date: Nov 2009
Posts: 123
|
It is a double Hydra 26 light and all colors are set to 50% . It is only on the right side that it flickers so softly? Thanx to both of you for commenting. Made by A1 Prime
|
04/23/2018, 07:00 PM | #5 |
Registered Member
Join Date: Nov 2017
Posts: 53
|
Is it a green color?
|
05/20/2018, 07:56 PM | #6 |
Registered Member
Join Date: Oct 2014
Posts: 29
|
i would def contact ai
|
|
|