6055 Question

radiata · 08/30/2016, 08:31 PM

What is the correct voltage setting for the 6055.240 power supply for the 6055? I have two that were factory set at 20V but I've seen recommendations for using 18V.

rvitko · 08/31/2016, 08:43 AM

Anything from 12-24, this is one way to set the speed, we do recommend 18-20 for the break in phase to reduce noise, but outside of noise their is no reason you can't use any of them. 24V is needed for maximum output.

08/30/2016, 08:31 PM	#1
radiata Registered Member Join Date: Jun 2002 Location: Livingston, NJ Posts: 851	6055 Question What is the correct voltage setting for the 6055.240 power supply for the 6055? I have two that were factory set at 20V but I've seen recommendations for using 18V. __________________ "I love the smell of skimate in the morning..." Current Tank Info: Multiple - 600+ Net Gallons

08/31/2016, 08:43 AM	#2
rvitko RC Sponsor Join Date: Apr 2000 Location: Austin Texas USA Posts: 35,785	Anything from 12-24, this is one way to set the speed, we do recommend 18-20 for the break in phase to reduce noise, but outside of noise their is no reason you can't use any of them. 24V is needed for maximum output. __________________ Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish