|
11/16/2014, 01:50 PM | #1 |
Registered Member
Join Date: Nov 2012
Location: Phoenix, AZ
Posts: 1,712
|
Need programming suggestion
I have a float switch in my Kalk dosing bucket when its empty need a pump in a mixing bucket to come on for 1.20 minutes to fill the dosing bucket then shut off. How can I accomplish this?
|
11/16/2014, 05:36 PM | #2 |
Registered Member
Join Date: Nov 2012
Location: Phoenix, AZ
Posts: 1,712
|
Sorry forgot to mention I have a apex system. This may seem simple command "If Switch Closed then on" but the problem is the switch is at the bottom of the bucket. When the water starts filling the pump will prematurely shut off need it to stay running for one minute and twenty seconds then shut off.
|
11/16/2014, 06:18 PM | #3 |
In Memoriam
Join Date: Nov 2011
Location: Infinity and Beyond
Posts: 2,445
|
Almost positive this will work, but test it before you trust it. Notice there is no set command. So when Switch activates the outlet will come on and run for 1.20 then shut off
Fallback OFF If SwitchX Closed Then ON If SwitchX Open Then OFF Min Time 001:20 Then ON |
11/16/2014, 07:59 PM | #4 | |
Registered Member
Join Date: Nov 2012
Location: Phoenix, AZ
Posts: 1,712
|
Quote:
|
|
Tags |
apex, kalk bucket, outlet program |
|
|