|
06/13/2017, 04:32 PM | #1501 |
Registered Member
Join Date: Nov 2002
Location: Miller Place, NY
Posts: 7,206
|
Try tech support @ above contact??
__________________
250 gallon mixed reef, 2 Reefbreeder's Photon V 2, Deepwater BLDC 12, DAS EX-3 Skimmer, MTC mini cal, 2-3/4" Sea Swirls, Aquacontroller & 6 Tunze pumps. |
06/13/2017, 05:46 PM | #1502 |
Registered Member
Join Date: Sep 2003
Location: San Jose, CA
Posts: 6,499
|
Think the light is not holding time is my guess. Liked in computers the clock crystal might be bad
Sent from my iPhone using Tapatalk Pro |
06/16/2017, 07:31 AM | #1503 |
Registered Member
Join Date: Sep 2015
Location: North of 44
Posts: 44
|
Thanks all, I've sent a note to Adam. Will see what comes back. This is one of three vertex lights we have, but based on age and some issues, I'm thinking I will have to consider options for replacements in the next year.
|
06/18/2017, 10:34 AM | #1504 |
Registered Member
Join Date: Sep 2015
Location: North of 44
Posts: 44
|
Got in touch w Adam. He had me reset the first module. Light did a reset and came back on. Now I can't get the vstick to pair with this light. It sees the other two lights but not this broken one. Any thoughts about how to re-pair the light with the VStick?
Sent a note to Adam, waiting for response. |
06/18/2017, 11:09 AM | #1505 | |
Registered Member
Join Date: Sep 2004
Location: Cape Coral, Florida
Posts: 888
|
Quote:
|
|
06/22/2017, 08:32 AM | #1506 |
Registered Member
Join Date: Jun 2014
Posts: 15
|
So I know this probably isn't the right place to post this in. But I'm looking for mounting legs for an Illumina. Anyone have a set they don't need/use anymore?
Can't find any websites that still have them in stock and Vertex doesn't have any of them either. Thanks |
06/28/2017, 11:40 AM | #1507 |
Registered Member
Join Date: May 2014
Posts: 35
|
I picked up a second hand sr260 900mm for 320 dollars It has extra red and uv modules.
Only issue is the LCD screen is pixelated and cannot be used. I cna program it fine through v-link but wondered has anyone replaced the LCD screen on these and where do you get the parts from? |
06/28/2017, 10:53 PM | #1508 |
Registered Member
Join Date: Sep 2015
Location: North of 44
Posts: 44
|
Adam has new display ends. His contact info is in this thread. I can tell you I used one of my lights for over a year without the display end working.
|
06/29/2017, 02:05 AM | #1509 |
Registered Member
Join Date: May 2014
Posts: 35
|
|
07/06/2017, 04:48 PM | #1510 |
Registered Member
Join Date: Sep 2004
Location: Cape Coral, Florida
Posts: 888
|
Anyone have an issue with the expansion modules not working? I updated the firmware and it now shows the UV color but I can't get the UV expansion modules (the little 3 light board) to light up. I don't see anything to activate the module or update the particular module while doing a firmware update (it only shows the 2 main LED modules #0 and #1). Maybe it is a setting I'm missing ??
|
07/09/2017, 03:57 PM | #1511 |
Registered Member
Join Date: Sep 2004
Location: Cape Coral, Florida
Posts: 888
|
Updated the pads and still no joy. When I slide the UV slider in light studio, I get nothing on either fixture...all other color sliders work fine. Not working on either of the 2 SR260-300's. Very odd. Trying to get it figured out with Adam. I find it hard to believe that both would be burned out even though they are obviously being recognized in the software. Grrrrr
|
07/22/2017, 03:18 PM | #1512 |
Registered Member
Join Date: Sep 2004
Location: Cape Coral, Florida
Posts: 888
|
Anyone have good ideas as to how to canopy mount a couple Illumina fixtures ? Thanks !
|
07/27/2017, 10:45 AM | #1513 |
Registered Member
Join Date: Sep 2003
Location: San Jose, CA
Posts: 6,499
|
Here's what I did before upgrading to mitras
|
07/27/2017, 11:12 AM | #1514 |
Registered Member
Join Date: Sep 2004
Location: Cape Coral, Florida
Posts: 888
|
Trying to find out how to mount them. I don't have any hanging kit or anything.
|
07/27/2017, 12:47 PM | #1515 |
Registered Member
Join Date: Sep 2003
Location: San Jose, CA
Posts: 6,499
|
Maybe use 80/20 aluminum?
|
08/23/2017, 09:37 AM | #1516 |
Registered Member
Join Date: Feb 2014
Posts: 9
|
Hi guys. Yesterday we had a short power disruption. When power was restored my SR200 only shows a lighten control LCD which is blank. The light seems to be switched of. I power cycled it but it seems to get stuck in this "mode". I cannot connect to it wirelessly as well. What can I do?
Sent from my SM-G955F using Tapatalk |
08/24/2017, 01:56 AM | #1517 | |
Registered Member
Join Date: Aug 2011
Posts: 30
|
Quote:
I can try to help you out here, I have some experience with these lights... Can you send me a picture of the screen and size? The power cord goes on the other side in the illumina in, can you send a picture of the cable connected to the board? Maybe I can see some helpful hints. Have a great day Nic Gesendet von iPhone mit Tapatalk |
|
08/24/2017, 12:24 PM | #1518 |
Registered Member
Join Date: Feb 2014
Posts: 9
|
Hi Nic. Thank you very much! It is 1500 in length. Pics of the LCD and cable. (Do you need the actual cable joint?)
Sent from my SM-G955F using Tapatalk |
08/25/2017, 01:03 AM | #1519 |
Registered Member
Join Date: Aug 2011
Posts: 30
|
Thanks for the pictures, there is a way to find out if the master pad has got any damage or just the screen. I will try to find out today and come back to you.
Gesendet von iPhone mit Tapatalk |
08/25/2017, 10:27 AM | #1520 |
Registered Member
Join Date: Feb 2014
Posts: 9
|
|
08/26/2017, 11:57 AM | #1521 |
Registered Member
Join Date: Aug 2011
Posts: 30
|
Sorry for the late reply, can you answer the following questions please because it is not clear from the pictures.
Are the green lights on the splitter box on? Are the light in the mean well power supply on? If they work we can go next steps. Thank you. Nic Gesendet von iPhone mit Tapatalk |
08/26/2017, 02:29 PM | #1522 |
Registered Member
Join Date: Feb 2014
Posts: 9
|
Hi Nicologne. I will gladly answer.
The green lights on the splitter box is on. The mean well power supplies are also powered on. I have a Dropbox folder with photos of the light. If you PM your email address I will gladly share them. Thank you for your help. Sent from my SM-G955F using Tapatalk |
08/26/2017, 02:39 PM | #1523 |
Registered Member
Join Date: Aug 2011
Posts: 30
|
Pm send...
Gesendet von iPhone mit Tapatalk |
08/26/2017, 02:40 PM | #1524 |
Registered Member
Join Date: Feb 2014
Posts: 9
|
Thanks. Replying now.
Sent from my SM-G955F using Tapatalk |
08/29/2017, 03:46 AM | #1525 |
Registered Member
Join Date: Feb 2012
Posts: 10
|
Hi,
I have exactly the same problem after a power breakdown. Did you already find a solution ? NaifIMG_4382.jpg Gesendet von iPhone mit Tapatalk |
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Vertex Skimmer club | JohnL | Lighting, Filtration & Other Equipment | 2073 | 02/17/2020 11:59 AM |
Vertex Illumina LED Arrives | TheDogFather | Lighting, Filtration & Other Equipment | 251 | 06/27/2016 01:15 PM |
Vertex Illumina V-link connection help! | Dyrego | Lighting, Filtration & Other Equipment | 16 | 02/28/2013 10:08 AM |
Vertex Illumina LED Fixture - My New Toy Is Here! | Jeremy B. | Premium Aquatics | 77 | 08/12/2011 11:47 AM |
Vertex Skimmer club | mojo~ | Lighting, Filtration & Other Equipment | 999 | 03/02/2009 02:49 PM |