|
02/22/2017, 11:56 AM | #26 |
Registered Member
Join Date: Dec 2016
Location: Orange County
Posts: 43
|
I wish i had these carpentry skills You guys are killing it!
|
02/22/2017, 02:41 PM | #27 |
Registered Member
Join Date: Oct 2013
Posts: 90
|
My carpentry skills are "0" lol. Well maybe "1" now that I've built that stand, I just saw a bunch of videos on YouTube to get ideas. Winged it the rest of the way
Sent from my SM-G920V using Tapatalk |
02/23/2017, 01:35 AM | #28 |
Registered Member
Join Date: Jan 2017
Posts: 84
|
I second the no 2x4 option. I planned it out with 2x4's and it is a super tight fit for any reasonable size sump and space inside the stand, if you're doing an enclosed stand.
|
02/23/2017, 08:52 AM | #29 | |
Registered Member
Join Date: Oct 2013
Posts: 90
|
Quote:
Sent from my SM-G920V using Tapatalk |
|
02/24/2017, 11:21 PM | #30 |
Registered Member
Join Date: Nov 2002
Location: Spokane, WA
Posts: 668
|
So I just received the t-slot aluminum for the stand. It went together really quickly. Maybe this will help...
__________________
Greg Over time science has shown that the simplest answers are usually the correct ones....... Current Tank Info: Took everything down except my 14gallon biocube. However, I do have a 680 gallon wood w/glass viewing window on the drawing board. :-) |
02/03/2018, 06:10 AM | #31 |
Registered Member
Join Date: Feb 2018
Posts: 1
|
I bought the Marineland Corner overflow rimless. Also bought the stand that gave me a lifetime warranty but I am afraid to use it. the front to back sits about even but it seems left to right it sits right on the seams of glass not much wiggle room. Don't have a photo hosting to share the pictures here. I might just go DIY so many people tell me the Marineland stands are junk.
Here is a little clip I did quick. https://youtu.be/FX9NvShlFGU |
02/03/2018, 10:36 PM | #32 |
Registered Member
Join Date: Nov 2002
Location: Spokane, WA
Posts: 668
|
Order some 2020 extrusion from http://us.misumi-ec.com/ They will cut them to your exact measurements. The parts screw together and it is perfectly square. You can get the hardware from http://www.mrmetric.com/ I ordered mine extrusion from 2020.net but they are more expensive I believe. You will also want some 1/4" foam for the tank to sit on. I used the stuff made for aquariums.
https://scontent.fsnc1-1.fna.fbcdn.n...7e&oe=5ADF8A9C https://scontent.fsnc1-1.fna.fbcdn.n...5f&oe=5B135D98 https://scontent.fsnc1-1.fna.fbcdn.n...7b&oe=5AE012F5 https://scontent.fsnc1-1.fna.fbcdn.n...b4&oe=5ADB9A76
__________________
Greg Over time science has shown that the simplest answers are usually the correct ones....... Current Tank Info: Took everything down except my 14gallon biocube. However, I do have a 680 gallon wood w/glass viewing window on the drawing board. :-) |
02/06/2018, 02:41 PM | #33 |
Registered Member
Join Date: Jul 2002
Location: Wylie, TX
Posts: 473
|
I have a 120 gallon tank. I built mine out of steel and faced the sides with wood.
|
02/08/2018, 01:06 AM | #34 |
Super Best Friends!
Join Date: Jan 2008
Location: OKC, OK
Posts: 3,772
|
I bought a Cadlights 60g cube system. The stand is made of 1/2" hardwood ply with what look like 1.5/2.5" 'studs' in each corner. I'd be willing to bet that they were used more for attaching the sides with minimal visual impact (screw holes, etc), than for structural purposes.
My stand for my 120g uses plywood for the structural support as well. It might have some 1x2s in the mix, but 3/4" ply holds up the weight. There used to be a picture running around her showing the strength of plywood stands. A guy built one for a really big tank (200-300g) and proved its strength by dropping a load of bricks on it and then laying on top of it all. The enclosure I built to house my ATO bucket has 2 walls made of 1/2" plywood that the top rests on. I can stand on it to work in the tank with no issues, so long as I don't side-load it. It holds 220lbs with no issue. So long as you prevent side-to-side motion, plywood will do just fine.
__________________
"The moral is the chosen, not the forced; the understood, not the obeyed. The moral is the rational, and reason accepts no commandments." - John Galt Current Tank Info: Cadlights 60G Arisan II mixed reef with 2x MP40s and 24" ATI |
|
|