|
|
|
09/21/2018, 08:26 PM
|
#1 |
|
Registered Member
Join Date: Jan 2004
Location: East Coast/West Coast
Posts: 4,887
|
Which ballast for my 250w radium?
One of my ballasts went out and was going to get an m80 ballast from Hamilton but they are sold out. Does anyone else sell those? Or is there another GOOD eballast that someone has experience with that are still being produced?
Sent from my SAMSUNG-SM-G935A using Tapatalk
__________________
- John *blackthunda stands for a black Mistubishi 3000GT with black rims I used to own. Don't get any funny ideas! Current Tank Info: 200 Gal custom tank with dual corner overflows, 80 gal custom sump/refugium, Neptune Apex controller, Dual Lumenmax Elite reflectors with 250 Radiums, SWC 160 Cone Skimmer, 2x Jebao WP-25....and some other stuff. |
|
|
|
09/22/2018, 10:27 AM
|
#2 |
|
Registered Member
Join Date: May 2001
Location: Iowa
Posts: 817
|
Lumatek or Galaxy probably used, Or IceCap has one out also
Last edited by Fig; 09/22/2018 at 10:50 AM. |
|
|
|
|
09/22/2018, 02:40 PM
|
#3 | |
|
Registered Member
Join Date: Jul 2008
Location: Edmonton Alberta
Posts: 4,717
|
Quote:
__________________
----------------- Current Tanks: New 210 custom 84 x 24 x 24, 60g sump, SWC 250 extreme with bubble blaster 5000, 2 vortech mp40, 2 vortech mp10, 12 T5, Water blaster 5000, warner marine bio pellets, 60g clownfish cube, red carpet anemone with a 25g sump,SRO octopus 1000sss, 250w radium, lumenarc large. |
|
|
|
|
|
09/24/2018, 05:42 AM
|
#4 |
|
Registered Member
Join Date: Jan 2005
Location: Zuehl, Texas
Posts: 4,460
|
Although the M80 is the preferred choice, electronic run on 250+ works fine. My lamps averaged 16 months with 24+ and a 12 month lamp stuck in the mix. I used a PAR and Foot Candle Meter to always check my lamps and changed them when they dropped 10%
|
|
|
|
 |
| Thread Tools | |
|
|
