|
12/14/2017, 01:39 PM | #1 |
Registered Member
Join Date: Nov 2008
Location: Clearwater/Dunedin
Posts: 1,990
|
Apex Module set up
I have a large Apex system(Multiple modules, EB8's etc.). I am doing a major overhaul on my wiring and will be disconnecting everything completely then rehooking everything back up. Will all my modules, EB8's etc. be recognized again regardless of how the Aquabus cables are run as long as all the modules are connected or will I have to re-program everything and have a lot of new modules added to Fusion that I will have to figure out which are the new ones and which are the old ones?
I hope this makes sense Aaron
__________________
Thanks Reef Central!!! Current Tank Info: 240 Gallon Mixed Reef Miracles Custom 72x30x25 Starfire, COR20 RD3 80W, BK Alpha 200, MP40QD's, Radion G4 Pros * 80 Gallon Deep Blue Rimless SPS Dominant 48x24x16 Starfire, RD5 ECO, BK Mini 160, MP40QD's, Radion Gen4 Pros* Apex Controlled |
12/14/2017, 03:06 PM | #2 |
Registered Member
Join Date: Jun 2010
Location: Tampa
Posts: 643
|
As long as the same modules are connected, everything will stay the same. I have gone through a major reorganization like this several times without any issues. It never hurts to have a backup of your configuration.
__________________
Matt Don't pee on my leg and tell me it's raining. Current Tank Info: 190 Last edited by mal7887; 12/14/2017 at 07:26 PM. |
12/14/2017, 03:06 PM | #3 |
Registered Member
Join Date: Jun 2010
Location: Tampa
Posts: 643
|
And no, they do not have to be connected in the same order as they are now.
__________________
Matt Don't pee on my leg and tell me it's raining. Current Tank Info: 190 Last edited by mal7887; 12/14/2017 at 07:26 PM. |
12/14/2017, 05:23 PM | #4 |
Registered Member
Join Date: Nov 2008
Location: Clearwater/Dunedin
Posts: 1,990
|
Thank you kindly!
__________________
Thanks Reef Central!!! Current Tank Info: 240 Gallon Mixed Reef Miracles Custom 72x30x25 Starfire, COR20 RD3 80W, BK Alpha 200, MP40QD's, Radion G4 Pros * 80 Gallon Deep Blue Rimless SPS Dominant 48x24x16 Starfire, RD5 ECO, BK Mini 160, MP40QD's, Radion Gen4 Pros* Apex Controlled |
12/15/2017, 10:46 AM | #5 |
Registered Member
Join Date: Feb 2015
Location: San Jose, CA
Posts: 2,136
|
Make sure EVERYTHING is up to date firmware wise.
If a module is not up to date, it CAN jump addresses. Sent from my iPhone using Tapatalk
__________________
Vincent 40g custom AIO --> DSA190Pro |
Thread Tools | |
|
|