|
05/10/2015, 06:46 PM | #76 |
Registered Member
Join Date: Jan 2015
Posts: 1
|
same as others here, would like to have your converter O2 but can't send you a PM. Is there any way around the 10 posts thing?
|
05/28/2015, 04:15 PM | #77 |
Registered Member
Join Date: Sep 2009
Posts: 322
|
sent you a PM 02
|
07/16/2015, 02:06 PM | #78 |
Registered Member
Join Date: Jul 2015
Posts: 1
|
I also would like some info on this converter. I have tried the converter from Steve's and when I lowered the signal to off, the LEDs remained lit. I am currently using an arduino controller that I built and know first hand that these drivers can be driven down to 1% without issues. I am looking for a converter that responds well with the Apex controller and will shut off the LEDs when my Apex turns off the channel.
Thx, |
07/24/2015, 11:03 AM | #79 |
Registered Member
Join Date: Aug 2013
Location: Honolulu/Hickam AFB, HI
Posts: 1
|
Has anyone tried these on the Lumentek 240PRO? I am looking at getting an APEX after the new year and wanted to control my lights with it. Thanks.
|
08/27/2015, 12:49 PM | #80 |
Registered Member
Join Date: Aug 2015
Posts: 1
|
Steves 0-10V converter
I ordered one 2 days ago and just got it today. It dims down to 0% just fine - that is completely lights off, and I'm using an Apex.
I like the connectors on it too, you just push the wire into it and it holds on. Plus it was like $20 so you can't beat that. Ian |
10/02/2015, 08:35 AM | #81 |
Registered Member
Join Date: Jul 2015
Location: Florida
Posts: 5
|
Hi 02surplus...inquiring about your converter and driver board. I can not PM is there another way to email?
|
10/02/2015, 04:55 PM | #82 |
Registered Member
Join Date: Oct 2015
Posts: 8
|
PWM Converter
@O2Surplus, can you PM me? Interested in that PWM converter for my Apex.
|
10/03/2015, 07:47 AM | #83 |
Registered Member
Join Date: Jul 2015
Location: Florida
Posts: 5
|
hi 02surplus...I did send an email to you yesterday
|
10/03/2015, 10:10 AM | #84 |
Registered Member
Join Date: Aug 2011
Location: "The Land of Fruits & Nuts"
Posts: 879
|
I just sent you a response.
__________________
I love the smell of molten solder in the morning. |
10/03/2015, 10:44 AM | #85 |
Registered Member
Join Date: Oct 2015
Posts: 8
|
PWM Converter
Hey O2,
Like the others, I cant reply until i have 10 posts: Yes I think i need 2 of them. I have 2 AQUAMANA 165W COB LEDs, White, Colors and moonlight. Will I need 2? When I dim to 0, does it shut the light off? I ask because I would want to remove the 4 power sources for the 2 lights from my Apex energy bar and put it on an external power source so that I free up those slots. - CBrodus |
11/06/2015, 05:20 PM | #86 |
Premium Member
Join Date: Feb 2003
Location: NoVA
Posts: 464
|
Are there any good small power supplies that could be used in conjunction with the PWM converter to drive just a couple leds for moonlighting?
__________________
Always Something...... Current Tank Info: 45 Cube | Past tanks: [72BF][40L][20H] |
12/22/2015, 03:16 PM | #87 |
Registered Member
Join Date: Oct 2015
Posts: 8
|
APEX 0-10v signal converter
Hey O2:
Any updates on the converters? If they are available I would need 4? (I have 2 aquamana COB LEDs). Thanks in advance. CBrodus. |
01/04/2016, 09:35 PM | #88 |
Registered Member
Join Date: Mar 2011
Location: Beloit, Wi
Posts: 51
|
Well i dont have enough posts and i cant find ya on ********* so ill just post this here. Please pm me when you get some time.
Good evening, Are you still producing the boards? I have a 48v meanwell supply a rapid led board for my ldd drivers and an apex I would wither power your board with a 12v supply (Neg side of that tied to the negative of the 48v supply) Would your product get the job done? I have a steve's led one but even with the grounds tied im not getting an output. I need to get the oscilloscope out tomorrow to confirm but i dont like the lack of any information from their site. Thank you for your time Steven McLenachen |
01/06/2016, 09:19 AM | #89 |
Registered Member
Join Date: Mar 2011
Location: Beloit, Wi
Posts: 51
|
Payment sent to 02Surplus for one of his. No response from Steve's led's on my non functioning unit from them and i have been too busy to get the Oscilloscope out and check its function on the bench.
|
01/10/2016, 09:16 AM | #90 |
Registered Member
Join Date: Oct 2015
Posts: 8
|
Hey O2:
Got your PM, still can't reply due toy post count: I have 2 aquamana led fixtures with 2 dimmers (1white, 1 color). Will I need 4 PMW converters? |
01/10/2016, 06:29 PM | #91 |
Registered Member
Join Date: Mar 2011
Location: Beloit, Wi
Posts: 51
|
Hey 02Surplus you received my paypal payment right? Haven't seen anything.
|
01/10/2016, 10:27 PM | #92 | |
Registered Member
Join Date: Aug 2011
Location: "The Land of Fruits & Nuts"
Posts: 879
|
Quote:
__________________
I love the smell of molten solder in the morning. |
|
01/11/2016, 12:09 PM | #93 |
Registered Member
Join Date: Mar 2011
Location: Beloit, Wi
Posts: 51
|
|
01/11/2016, 09:18 PM | #94 |
Registered Member
Join Date: Nov 2002
Location: Swartz Creek
Posts: 728
|
O2's product will work flawlessly for you, I have one, and have a project going with a buddy for another. I am thinking that next year when I evaluate lighting again, a DIY LED may be the ticket, controlled by 4 channels on my Apex, using this board.
__________________
Just say no to CRABS! Current Tank Info: 85 Gallon mixed Reef. Halide/LED combo lighting. |
01/14/2016, 06:03 PM | #95 |
Registered Member
Join Date: Oct 2015
Posts: 8
|
O2: Sent you funds via Paypal. Upon further reading i see that this is a 4 channel converter, correct?
|
01/31/2016, 08:20 AM | #96 |
Registered Member
Join Date: Oct 2015
Posts: 8
|
Hey there, anyone know if this is a 4 channel controlller?
|
09/11/2017, 09:48 PM | #97 |
Registered Member
Join Date: Apr 2017
Posts: 16
|
OK - I know I'm bumping an old thread, but I have a question regarding Steve's aquarium controller vs o2surplus's converter.
Currently Steve's price is down to $20 for a 4 channel. Is O2surplus (I'll PM him after this post - as it is post # 10) still selling his board? What are the main differences between the two? I thought I read somewhere (can't find it now) that Steve's does not go all the way to 0 where O2surplus's does. Is that true? Can a single APEX output drive two inputs on the above boards? Thanks in advance. Ron |
09/12/2017, 12:02 PM | #98 | |
Registered Member
Join Date: Feb 2010
Posts: 190
|
Quote:
__________________
"It's hard to be superman when you are surrounded by kryptonite" |
|
09/27/2017, 09:07 AM | #99 | |
Registered Member
Join Date: Apr 2017
Posts: 16
|
Quote:
Ron |
|
|
|