Rd3 230 issue

[jwilliams860]

Scott,

Can you point me in the right direction for this?

I have a 230 pump, anticipating a larger tank here in the next few months. I was moving the pump and broke this piece on the calcium bypass on the back side. It appears the 1/4" like cooking out of the bank of the pump was broken off.

Is this something I can service and replace on my own with the parts from you all?

I can't get photos to load from my phone.

Thanks

[slief]

Originally Posted by jwilliams860

Scott,

Can you point me in the right direction for this?

I have a 230 pump, anticipating a larger tank here in the next few months. I was moving the pump and broke this piece on the calcium bypass on the back side. It appears the 1/4" like cooking out of the bank of the pump was broken off.

Is this something I can service and replace on my own with the parts from you all?

I can't get photos to load from my phone.

Thanks

Sorry for the late reply. PM me your phone number and I will walk you through a simple fix.

[jwilliams860]

[QUOTE=slief;25639830]Sorry for the late reply. PM me your phone number and I will walk you through a simple fix.[/QUOTE

I'm in NC here.

I'm at the amusement park with the fam, I should be out of here by 10 est.

[slief]

Originally Posted by jwilliams860

I'm at the amusement park with the fam, I should be out of here by 10 est.

Will call you soon. I’d suggest removing your number from the post. If you can’t edit your post, I will ask the moderators to remove it so you number is out there in public. My call will come from a 239 or 818 area code.

[jwilliams860]

Scott,

I've got had any luck getting the piece of carbon tube out of the 90 degree JG fitting, it wants to crumble on the end as well,. I tried the paper clip and was unsuccessful. There may be enough of the carbon tube in the rear of the pump I could get a JG coupling onto it and then use some sort of extension to get it connected to the 90.

Any ideas?

[slief]

Originally Posted by jwilliams860

Scott,

I've got had any luck getting the piece of carbon tube out of the 90 degree JG fitting, it wants to crumble on the end as well,. I tried the paper clip and was unsuccessful. There may be enough of the carbon tube in the rear of the pump I could get a JG coupling onto it and then use some sort of extension to get it connected to the 90.

Any ideas?

PM me your phone number.

[jwilliams860]

Sent