Reef Central Online Community

Go Back   Reef Central Online Community > General Interest Forums > Do It Yourself
Blogs FAQ Calendar Mark Forums Read

Notices

User Tag List

Reply
Thread Tools
Unread 12/01/2018, 12:32 PM   #1
Old Salt 64
Registered Member
 
Join Date: Aug 2018
Location: Massillon, Ohio
Posts: 12
Water Mixing Container & Bulkheads

I'm attempting to plumb 3 32 gallon Brute containers together for mixing and distribution and want to know thoughts of using 1 inch regular bulk heads or the flexible uniseal type. I'm going to put bulkead in the sides and the bottoms of the cans.

Thinking hard on sides and flexible in bottom or?


I want bottom plumbed for draining and sides used for circulation between cans.


Two barrels stacked in an upright stand and one next to the stacked cans.


The goal is to premix with ease and then drain tank for appropriate amount and then replace all with ball valves, pumps etc. to facilitate time and ease.


Comments?


Thanks in advance.



Mike


Old Salt 64 is offline   Reply With Quote
Unread 12/01/2018, 04:05 PM   #2
Old Salt 64
Registered Member
 
Join Date: Aug 2018
Location: Massillon, Ohio
Posts: 12
Revision of Post

Ok I'm going a slightly different route. I've built a stand that is anchored to the wall and it will hold two 23 gallon Rubbermaid HD cans so I figured I might as well build a second stand and that way not only will it be a simpler system to direct the plumbing but also give me more capacity of changing a higher volume of water.

I guess my biggest question is which bulkhead fitting would you recommend? traditional with a gasket and nut or uni-seal of a combination?


Old Salt 64 is offline   Reply With Quote
Unread 12/01/2018, 05:56 PM   #3
homer1475
Registered Member
 
homer1475's Avatar
 
Join Date: Mar 2015
Location: Upstate NY
Posts: 5,313
I actually found bulkheads at lowes that are designed for non flat surfaces. They have a thick rubber gasket that squishes to conform to the shape.



Not a fan of uniseals(although a lot of people use them with no issues), and regular bulkheads will leak on a plastic barrel.


__________________
80G SCA Build: http://reefcentral.com/forums/showthread.php?t=2560256

Originally posted by der_wille_zur_macht:

"He's just taking his lunch to work"
homer1475 is offline   Reply With Quote
Unread 12/01/2018, 07:00 PM   #4
rfgonzo
Registered Member
 
rfgonzo's Avatar
 
Join Date: Sep 2013
Location: Michigan
Posts: 1,280
I run bulkheads out the bottom of my 32 Brute's and uniseals out the sides. I wasent sure about the uniseals at first. I've ran them for years now with no issues. extremely tight seal.


__________________
210 gal reef, 75 gal Refuge with 55 Gal sump mixed reef
100 gal Reef, 75 gal Refuge with 55 gal sump. SPS/LPS &
100 gal Japanese Dragon Moray eel tank with 40 gal sump
75 gal Brazilian Dragon Mor
rfgonzo is offline   Reply With Quote
Unread 12/04/2018, 12:38 PM   #5
laverda
Registered Member
 
laverda's Avatar
 
Join Date: May 2003
Location: Anaheim, CA
Posts: 6,902
If not too curved where you put the bulkhead the container will distort to seal a normal bulkhead.


__________________
240G mixed reef, 29G SPS/LPS clam tank, 50G mixed reef

Current Tank Info: 300g mixed reef, 50g cube
laverda is offline   Reply With Quote
Unread 12/11/2018, 12:03 PM   #6
frankv702
Registered Member
 
Join Date: Aug 2015
Posts: 132
On my 32g brute can mixing station I used bulkheads on the bottom and uniseals on the side. I had it like that for about 2 years with no issues.


frankv702 is offline   Reply With Quote
Unread 12/15/2018, 06:48 PM   #7
FullBoreReefer
Registered Member
 
FullBoreReefer's Avatar
 
Join Date: Jul 2010
Location: Wooster, OH
Posts: 1,862
Bulkheads for flat areas, uniseals for curved.

I’ve used both appropriately for 10+ years and never had issues with either. I know for sure I have one uniseal going on 12yrs on a 5gal bucket...never a leak.


__________________
60x36x24 mixed reef. 40b sump. Regal 250int Varios. 4xHydra26HDs+t5s. 4xMp40wes. Apex2016.
FullBoreReefer is offline   Reply With Quote
Unread 12/21/2018, 12:07 PM   #8
Seasidenj
Registered Member
 
Join Date: Mar 2017
Posts: 55
Unusual on any curved portions bulkheads on flat


Seasidenj is offline   Reply With Quote
Unread 12/21/2018, 08:13 PM   #9
Djbeasley05
Registered Member
 
Join Date: Feb 2018
Posts: 644
I love uniseals for anything rounded


Sent from my iPhone using Tapatalk


Djbeasley05 is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -6. The time now is 07:13 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2024 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright ©1999-2022
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.