Share your Ledzeal ramping schedule Thread

[MRCYCS805]

Just placed my order wooowooo

[MRCYCS805]

Originally Posted by tastyfish

Yes, very easy. I'm not sure if I'm allowed to link but I have a build thread on the UltimateReef site (mod: pls remove if not allowed: http://www.ultimatereef.net/forums/s...32#post7125032)

Here's the inside of the LEDZeal, after removing the access panel on the top.



Kevin will send you some instructions, but make sure you're grounded so you don't zap a board with static. Unscrew the screws on the connections and then the mounting screws.

You don't need the connectors at each end of the light, so the endplates can be removed along with the wiring and replaced with the solid versions supplied. (Be careful cutting the zip ties and replace them so that you don't get an annoying rattling when the fans come on).

The RF board to the left is redundant, it can be removed. (I left mine as the screws were nylon and threadlocked in place).

Here's the new board installed:


NOTE: Follow Kevin's instructions on the fan sockets, I noticed I had plugged them in the wrong sockets after this photo!

Once it's all done, checked and buttoned back up, power up, scan for wifi networks and connect to "Wifi Socket". You can then use the app which will auto-find all LEDZeals on the network.

Of course you'll want to connect to your existing wifi network and secure it, so theres is a small webserver on the board which has a network config menu so that you can plug in your wifi network details (http://192.168.1.100 from a browser). If you send me your email address, I'll send the config guide.

Cheers

Rob

Installed the board the apps slick i only have one problem now channel 4 is at 100% all times it wont dim or turn off unless i unplug the unit i emailed kevin to see what it could be i unpluged the wires from the board to verifiy and they turned off but once I connect them its a hundred percent all the time no matter how I set it even in manual on the app setting the light on a digital timer till I can get this figured out I hate to put in all the stuff I just took out that would suck let's see what kevin can come up with

[MRCYCS805]

Got a new board on the way after sending a few pictures to kevin and troubleshooting . kevins on it over their great customer service will update once received. Thanks for all the help rob the programing info you sent helped alot

[MRCYCS805]

Originally Posted by MRCYCS805

Got a new board on the way after sending a few pictures to kevin and troubleshooting . kevins on it over their great customer service will update once received. Thanks for all the help rob the programing info you sent helped alot

Well got the new board on Friday installed it and same problem. I think they're sending me aboard for a smaller light after inspecting both boards which did not work the little drivers look fried. I emailed kevin again I guess this wifi is not for me work on getting a refund or something let's see what happens at this point I'm just really disappointed everything was installed perfect and correct and verified with kevin engineers now I have the old board and controller reinstalled and the light works perfect

[tastyfish]

That's bad news mate. Not sure what went wrong as your board was completely different to mine. Hopefully you're back up and running again.?

[BIGCYCS805]

Well had a replacement board sent to me by kevin and minutes after installing channel 4 got stuck on again so I was back in contact with him I was refunded and had to install my old board and the two boards that fried we're actually burnt at the board and they were perfect when I installed them I sent pictures back and forth and Kevin verified with their technician that I installed it correctly and for some reason it just wouldn't work sucks cuz I really wanted the app lol at least it was easy to put in and take out

[tastyfish]

That sucks, I've been having a few teething issues with mine, the main issue was traced to the wifi board which was replaced. Unforunately, DHL "repackaged" it in nice statically charged polystyrene....

Kevin sent out a new board and it works fine. It does have a hissy fit sometimes if there is a power outage, but other than that it works well.

I feel that the wired or wireless controller version is still the bullet proof way to contoll the unit, although the app is nice.

[tastyfish]

Hi All,

So I've just given my tank a proper stocking of SPS (acro's, stilo's, monti's) with both frags and colonies. I have the LEDZeal on 67% on the blue and royal blue channels with white building up. (I had to do some Dinoflagellate control so was on blues only following a blackout).

What are you running for light demanding SPS? I'm running a 2ft deep tank.

Thanks

Rob

[TexanTrail]

Just bumping this back to the top. I've got the S400 ordered for my 6ft 125 gal tank. Any more schedules anyone wants to share?

[jackny]

Pls any one can share setting for S300

[jackny]

I just got my S300. Here is settings

Led1:
0:00 0%
11:00 0%
12:00 60%
13:00 80%
14:00 80%
16:00 80%
18:00 40%
22:00 0%

Led2:
0:00 0%
11:00 0%
12:00 80%
13:00 100%
14:00 100%
16:00 100%
18:00 60%
22:00 0%

Led3:
0:00 0%
11:00 0%
12:00 50%
13:00 60%
14:00 85%
16:00 85%
18:00 40%
22:00 0%

Led4:
0:00 0%
11:00 0%
12:00 30%
13:00 70%
14:00 70%
16:00 60%
18:00 20%
22:00 0%

[BIGCYCS805]

I'll check my settings and post my schedule and my layout when I get home I wouldn't run the whites at 100 percent that might fry some Coral how high are your lights from the water

[jackny]

First corals are 20 cm below the water surface...the other 60cm. I'll put down white to 90%

Originally Posted by BIGCYCS805

I'll check my settings and post my schedule and my layout when I get home I wouldn't run the whites at 100 percent that might fry some Coral how high are your lights from the water

[jackny]

Here is my new settings S300 I've reduced the second power ramp to 85℅.

Led1:
0:00 0%
11:00 0%
12:00 60%
13:00 80%
14:00 80%
16:00 80%
18:00 40%
22:00 0%

Led2:
0:00 0%
11:00 0%
12:00 80%
13:00 85℅
14:00 85%
16:00 85%
18:00 60%
22:00 0%

Led3:
0:00 0%
11:00 0%
12:00 50%
13:00 60%
14:00 85%
16:00 85%
18:00 40%
22:00 0%

Led4:
0:00 0%
11:00 0%
12:00 30%
13:00 70%
14:00 70%
16:00 60%
18:00 20%
22:00 0%

Pls anyone can share schedule of S300? Many thanx Jack

[ChristianSG]

Hello! Does anyone have this configuration of leds in their malibu s150? I need to program my lamp and I will not do it...thanks! these are screenshots of the program now and the configuration of led channel...

[ChristianSG]

Originally Posted by ChristianSG

Hello! Does anyone have this configuration of leds in their malibu s150? I need to program my lamp and I do not know, thanks! these are screenshots of the program now and the configuration of led channel...

[fishy_mcfish]

Where do you buy these lights? I looked on their website but didn’t see any pricing??


Sent from my iPhone using Tapatalk

[tastyfish]

Originally Posted by fishy_mcfish

Where do you buy these lights? I looked on their website but didn’t see any pricing??


Sent from my iPhone using Tapatalk

Directly from LEDZeal - they have email, messenger and phone numbers on their site.

All my interactions were over email. It's worth reaching out to them as they know their lighting systems and give valuable advice on configuration prior to ordering.