|
|
|
12/09/2017, 10:23 AM
|
#1 |
|
Registered Member
Join Date: Feb 2002
Location: Rush, N.Y.
Posts: 4,058
|
1073.05 control parts
Tunze 1073.05
Can I purchase the part that controls the flow linked between the pump and the power supply. It has always had a short in it and wiggling it around or tapping on it has always got it working again. It still might, but it's now needing more like a hammer. Ok not so much but you get the idea... Thanks...
__________________
93G Rimless Cube Current Tank Info: 93G Rimless Cube |
|
|
|
12/11/2017, 09:31 AM
|
#2 |
|
RC Sponsor
 
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
A short is unlikely, bad contact is most likely the issue. Is this a newer one with the built in 7090 controller or the old black box connector? On the old connector the pin in the power socket has a split in it, with a very small slotted screwdriver like you might use for eyeglass repair, spread the split slightly so it will have better contact, sometimes the socket has slipped back in the box if the box has popped open. In that case line it back up and bend out the tabs on the black box gently so they lock in more firmly.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
|
|
|
 |
| Thread Tools | |
|
|
