|
03/17/2013, 05:29 AM | #1 |
Registered Member
Join Date: Apr 2006
Location: Singapore
Posts: 2,971
|
Mp60 making loud wheeling sound , what should i do ?
Mp60 making loud wheeling sound , what should i do ?
it was in NTM mode but i changed to short pulse mode and it is ok. Does it indicate some thing going to spoil? |
03/17/2013, 08:30 AM | #2 |
Saltwater Addict
Join Date: Jan 2012
Location: Vandalia OHIO
Posts: 11,624
|
Was the sound coming from the wet side or the dry side motor? Mine will sometimes make a weird louder whining noise when the motor is at a certain depend but it never lasts for more than a few seconds
|
03/17/2013, 03:35 PM | #3 |
Registered Member
Join Date: Apr 2006
Location: Singapore
Posts: 2,971
|
dry side .
|
03/18/2013, 11:13 AM | #4 |
Registered Member
Join Date: Jan 2007
Location: Mission Viejo, CA
Posts: 44
|
mine did the same thing on long pulse but went away after a few weeks
|
03/18/2013, 11:16 AM | #5 |
Moved On
Join Date: Apr 2010
Location: canada, toronto
Posts: 8,161
|
turn it off and on.
|
03/18/2013, 03:42 PM | #6 |
Registered Member
Join Date: Apr 2006
Location: Singapore
Posts: 2,971
|
i am kinda of concern if it is an indication some thing going to spoil soon
|
03/18/2013, 06:32 PM | #7 |
Saltwater Addict
Join Date: Jan 2012
Location: Vandalia OHIO
Posts: 11,624
|
If it is brand new contact ecotech customer service if it is something that is defective they will replace it. Mine would make a chatter noise when the feed mode was I gauged but that was only because I didn't have the wet and dry sides properly aligned sounds like you may have the same issue. The wet side is 3 pieces the shroud, the impeller and magnet and the rest of the wet side with the metal post so if those all look good then it kinds like a alignment issue
|
03/18/2013, 06:33 PM | #8 |
Saltwater Addict
Join Date: Jan 2012
Location: Vandalia OHIO
Posts: 11,624
|
iPad speed check!! Drives me nuts if you can't understand what I tried to write I will clarify
|
03/18/2013, 06:34 PM | #9 |
Saltwater Addict
Join Date: Jan 2012
Location: Vandalia OHIO
Posts: 11,624
|
|
Thread Tools | |
|
|