|
01/24/2008, 09:26 AM | #51 |
Registered Member
Join Date: Dec 2002
Location: Jacksonville,FL
Posts: 1,156
|
Guys for this application the bondo brand will work fine.Not talking bad about anybody,but a lot of people on here dont know there left from right when it comes to epoxy resins.
I dont know if you guys know who Tgreene here on RC is,but he has a large coral prop system.His prop tank is 8' X 4' X 12".Its made of plywood, and he used a combo of bondo brand epoxy and baer garage floor epoxy to seal his tank ,with no ill side effects.Not to mention he saved a good amount of cash by not buying the expensive stuff. The only member on this site that I have seen that his project deemed the use of the more expensive epoxy resin is Fudge,and thats because he built a large fiberglass skimmer.
__________________
Jorge We are the Reef Central....It is useless to resist. We will assimilate you into our collective. Resistance is futile. |
01/24/2008, 09:38 AM | #52 |
Registered Member
Join Date: Jul 2006
Location: Houston TX
Posts: 145
|
I just used some bondo 2 part fiberglass resin on a piece I'm working on right now and none of the foam has broken down. I was instructed to let it cure for a couple weeks even though the can says it cures in 2 hours. by the potent smell a day after I used the resin I can tell you that 2 weeks seems more accurate. Work in a very well ventilated area, if you can't work out doors.
Joshua
__________________
"Not an expert...feel free to ask for advice." Joshua "The pen is mightier than the sword,...if you shoot that pen out of a gun." Stephen Colbert Current Tank Info: 120 gallon mixed reef tank w/ T5 lighting |
01/24/2008, 09:38 AM | #53 | |
Registered Member
Join Date: Sep 2007
Location: Bryan Ohio
Posts: 777
|
Quote:
__________________
God will have Mercy Your SW tank WONT- Me Freedom Must occasionally be renewed with the blood of patriots-General Patton Current Tank Info: 55g reef to be(buying stuff now), 20g high Goldfish, 20g High FW Semi Aggressive, 35g hex Community tank, 10g SW Fowlr |
|
01/24/2008, 09:42 AM | #54 | |
Registered Member
Join Date: Sep 2007
Location: Bryan Ohio
Posts: 777
|
Quote:
__________________
God will have Mercy Your SW tank WONT- Me Freedom Must occasionally be renewed with the blood of patriots-General Patton Current Tank Info: 55g reef to be(buying stuff now), 20g high Goldfish, 20g High FW Semi Aggressive, 35g hex Community tank, 10g SW Fowlr |
|
01/24/2008, 10:18 AM | #55 |
Registered Member
Join Date: Jul 2006
Location: Houston TX
Posts: 145
|
I would also recommend that you have plenty of sand to put on it I used pavestone brand pulverized limestone and it has a light gray tone to it so I think when it's all said and done it will look great. I tried brushing it on the 1st time and the sand didn't really cover it very well, so I've gone to just pouring the sand on the resin while it's tacky.
regards....Joshua
__________________
"Not an expert...feel free to ask for advice." Joshua "The pen is mightier than the sword,...if you shoot that pen out of a gun." Stephen Colbert Current Tank Info: 120 gallon mixed reef tank w/ T5 lighting |
01/24/2008, 10:25 AM | #56 | |
Registered Member
Join Date: Sep 2007
Location: Bryan Ohio
Posts: 777
|
Quote:
__________________
God will have Mercy Your SW tank WONT- Me Freedom Must occasionally be renewed with the blood of patriots-General Patton Current Tank Info: 55g reef to be(buying stuff now), 20g high Goldfish, 20g High FW Semi Aggressive, 35g hex Community tank, 10g SW Fowlr |
|
01/24/2008, 12:54 PM | #57 |
Registered Member
Join Date: Nov 2003
Location: Winchester VA
Posts: 404
|
Lowes carries some fiberglass repair resin. It comes with a little vial of hardner you dump in and stir. Will it attack the foam?
__________________
"You gotta be smarter than the equipment you operate." Current Tank Info: 20gallon reef external glass overflow, diy light 175w 20k XM MH, 65w Actinic PC, 65w 10k PC, LED moonlight, OceansMotion, Velocity T-2 650gph, Euro-reef ES-52,RO/DI auto top off, pinpoint PH meter, diy acrylic sump, titanium pro II heater.... |
01/24/2008, 01:02 PM | #58 |
Registered Member
Join Date: Jul 2006
Location: Houston TX
Posts: 145
|
I don't know if the stuff you bought will, I just know as a fact that the bondo won't. but hey you could always get a little tester piece of foam and try it. Back to subject at hand.....Kannin, your rock work and design looks amazing, kudos.
Joshua
__________________
"Not an expert...feel free to ask for advice." Joshua "The pen is mightier than the sword,...if you shoot that pen out of a gun." Stephen Colbert Current Tank Info: 120 gallon mixed reef tank w/ T5 lighting |
01/24/2008, 01:58 PM | #59 |
Registered Member
Join Date: Dec 2002
Location: Jacksonville,FL
Posts: 1,156
|
Sorry to get so off topic Kannin,just trying to let the guys looking to do this know what they can use and what not.
For those of you useing epoxy resin for the first time,this stuff smells really bad and is very dangerous if not used in a well ventilated area.Total cure time should not take more then 48hrs.You could use it after 24hrs,but I would wait an extra day to be safe. Hey Kannin any new updates on your project.
__________________
Jorge We are the Reef Central....It is useless to resist. We will assimilate you into our collective. Resistance is futile. Last edited by alpine; 01/24/2008 at 02:05 PM. |
01/24/2008, 04:10 PM | #60 |
Registered Member
Join Date: Feb 2007
Location: Fall City, WA
Posts: 1,538
|
Vinnie... I used 4 sheets of egg crate for my entire 6 ft x 2.5 ft x 2 ft project... If you are using 3 sheets for a 55 gallon... you must be covering all six sides.
Everyone else... I used $13 worth of finishing resin... it was easy to work with... cured relatively quickly and as you can see by some of my pics, I applied it in my dining room... meaning, it didn't hardly smell at all.
__________________
I used to target feed mojanos... until I found out that they weren't baby bubble tips. |
01/24/2008, 06:18 PM | #61 |
Registered Member
Join Date: Aug 2005
Location: arvada/Wheat Ridge
Posts: 330
|
Kannin I noticed you used alot of the foam ... have you checked if its going to float ? just wondering cause I really like the looks of your set up
__________________
Take me out to the black tell them I aint comin back... Current Tank Info: 90g Reef 65g aggressive 2.5g Nano |
01/24/2008, 06:41 PM | #62 |
Registered Member
Join Date: Feb 2007
Location: Fall City, WA
Posts: 1,538
|
I'm not too worried about it floating. It weighs close to 150 lbs and it is firmly wedged in under the eurobracing in the back and up against the bottom of the front panel. There is a top down pic on page 2 that illustrates the front panel brace.
__________________
I used to target feed mojanos... until I found out that they weren't baby bubble tips. |
01/25/2008, 04:45 AM | #63 | |
Registered Member
Join Date: Sep 2007
Location: Bryan Ohio
Posts: 777
|
Quote:
__________________
God will have Mercy Your SW tank WONT- Me Freedom Must occasionally be renewed with the blood of patriots-General Patton Current Tank Info: 55g reef to be(buying stuff now), 20g high Goldfish, 20g High FW Semi Aggressive, 35g hex Community tank, 10g SW Fowlr |
|
01/25/2008, 08:52 AM | #64 |
Registered Member
Join Date: Jul 2006
Location: Houston TX
Posts: 145
|
Kannin, what brand and where did you get the finishing resin?I have a 6 month old boy and I have to apply the bondo outside in below freezing weather due to the smell.
Thanks....Joshua
__________________
"Not an expert...feel free to ask for advice." Joshua "The pen is mightier than the sword,...if you shoot that pen out of a gun." Stephen Colbert Current Tank Info: 120 gallon mixed reef tank w/ T5 lighting |
01/25/2008, 01:37 PM | #65 |
Registered Member
Join Date: Feb 2007
Location: Fall City, WA
Posts: 1,538
|
I you don't need it by tomorrow... I would get this...
http://zap.supergluecorp.com/pt40.html I will post my brand tonight when I get home.
__________________
I used to target feed mojanos... until I found out that they weren't baby bubble tips. |
01/25/2008, 02:57 PM | #66 |
Registered Member
Join Date: Sep 2007
Location: Bryan Ohio
Posts: 777
|
Just a Note for everyone dont use the Big Gap Filler unless your doing a large area!!! lol i did a small piece today just to experiment and get the feel for it and im gonna have to trim down sooooooooo much just so it dont float lol!
__________________
God will have Mercy Your SW tank WONT- Me Freedom Must occasionally be renewed with the blood of patriots-General Patton Current Tank Info: 55g reef to be(buying stuff now), 20g high Goldfish, 20g High FW Semi Aggressive, 35g hex Community tank, 10g SW Fowlr |
01/25/2008, 03:30 PM | #67 |
Registered Member
Join Date: Feb 2007
Location: Fall City, WA
Posts: 1,538
|
You gotts use the red can.
__________________
I used to target feed mojanos... until I found out that they weren't baby bubble tips. |
01/25/2008, 06:00 PM | #68 |
Registered Member
Join Date: Sep 2007
Location: Bryan Ohio
Posts: 777
|
__________________
God will have Mercy Your SW tank WONT- Me Freedom Must occasionally be renewed with the blood of patriots-General Patton Current Tank Info: 55g reef to be(buying stuff now), 20g high Goldfish, 20g High FW Semi Aggressive, 35g hex Community tank, 10g SW Fowlr |
01/26/2008, 02:15 AM | #69 |
Registered Member
Join Date: Feb 2007
Location: Fall City, WA
Posts: 1,538
|
I used "20 MIN FINISH - CURE Epoxy". Distributed by Bob Smith Industries in Atasadero, CA. I bought it a model train store. It came in two 7 oz bottles. Easy to use with little or no smell and I think it was around 13 bucks.
__________________
I used to target feed mojanos... until I found out that they weren't baby bubble tips. |
01/26/2008, 02:19 AM | #70 | |
Registered Member
Join Date: Feb 2007
Location: Fall City, WA
Posts: 1,538
|
Quote:
By the way all... I started with 4 cans from THD and I ran out so I ran to Lowes and got two more... The cans I bought at THD were probably 25% bigger than the cans I bought at Lowes for the same price. I didn't realize that they were smaller until I got home.
__________________
I used to target feed mojanos... until I found out that they weren't baby bubble tips. |
|
01/26/2008, 08:07 AM | #71 |
Registered Member
Join Date: Jul 2006
Location: Houston TX
Posts: 145
|
great I'll look into getting that for sure.
Thanks...joshua
__________________
"Not an expert...feel free to ask for advice." Joshua "The pen is mightier than the sword,...if you shoot that pen out of a gun." Stephen Colbert Current Tank Info: 120 gallon mixed reef tank w/ T5 lighting |
01/26/2008, 09:28 AM | #72 |
Registered Member
Join Date: Jan 2006
Location: Long Island, NY
Posts: 294
|
That looks totally awesome. Has anyone every done this on a tank that is up and running? I don't have any coral yet but I do have fish. I could make it in pieces and insert it piece by piece. I could never get my aquascape to look good and I still need to add more LR, so if I went with something like this I could move all my rockwork forward in the tank and have more of a natural looking reef.
|
01/26/2008, 06:05 PM | #73 |
Registered Member
Join Date: Feb 2007
Location: Fall City, WA
Posts: 1,538
|
I would want to circulate water for a few days to make sure. You can't move your live stock for a few days?
__________________
I used to target feed mojanos... until I found out that they weren't baby bubble tips. |
01/26/2008, 08:29 PM | #74 |
Registered Member
Join Date: Jan 2006
Location: Long Island, NY
Posts: 294
|
I could put the fish in either the fuge or my water change tank. But when you say circulate the water, you pretty much mean the same water in the tank and check levels, correct? If I isolate the tank from my fuge and water change tank I can't do any water changes. Also has I wouldn't mind doing it wauth 90% rocks and 10% foam to hold, it down. I love to look. I think you tank looks awesome.
|
01/26/2008, 08:33 PM | #75 |
Registered Member
Join Date: Feb 2007
Location: Fall City, WA
Posts: 1,538
|
Yeah... that's what i mean. Even if my rocks were completely cured... I think I would still want to filter the cater with all of the glue and foam and run some carbon just in case.
I put my water in today and I am going to run a bunch of carbon and skim for a good couple of weeks before I even start to test the water.
__________________
I used to target feed mojanos... until I found out that they weren't baby bubble tips. |
|
|