|
12/01/2017, 06:22 PM | #1 |
Registered Member
Join Date: Dec 2015
Posts: 179
|
6055 Feed Button Stopped Responding
I have two 6055’s linked. Use one as the master so I hit the one button to feed the tank. Today that button stopped responding. Any way to fix this? For the time being I set the other controller as the master and the feed button works like it should.
__________________
Joe |
12/04/2017, 09:48 AM | #2 |
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
Under the front panel a momentary switch is pushed when you push the key pad. Usually the cause will be the membrane is pushed down so the button cannot spring back, open the controller and check everything, the manual shows how, then when you reassemble don't overly tighten the screws so there is some space for it to spring back.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
Thread Tools | |
|
|