|
07/14/2019, 12:24 PM | #1 |
Registered Member
|
Convert Apex Program to ecosmart live
Guys,
Need some help. A friend of mine has a 180 with 3 radion gen 4 XM15 Pro's over the top connect back to an apex. I absolutely love the look of his lighting schedule. I have a 180, with the exact same lights. I took screenshots of his program and tryied to replicate it through ecosmart, but it doesnt look exactly the same. Is there some sort of conversion i should have to do, i matched each of the sliders but my "sine wave" doesnt look exactly the save in the port and the lights to the eye look a little different. Below are the screenshots i took for reference. |
07/16/2019, 10:02 AM | #5 |
Registered Member
Join Date: Apr 2013
Posts: 1,793
|
First.. Your difference in ramp time points changes the look.
Like one has 2 hour between points where you have like 1/2 hr.. Linear dimming (brightening) is visually tricky..so "could" be problem. Point is your program is different to start with... Doubt if there is a "conversion" protocol of any kind but trail and error... but ???? You'd need to exactly set it up to see if there are differences..There might be. Work w/ the world...not fight it.. |
|
|