|
12/12/2011, 07:19 PM | #76 | ||
Registered Member
Join Date: Sep 2009
Location: Brighton, MI
Posts: 1,230
|
Quote:
Quote:
By design, I've made it a point to include (highlight) the risks associated with failing to follow laser safety precautions - not becasue I beleive lasers to be a bad idea, but rather to "alert" those new to lasers into paying attention to the very real dangers and safety risks. The single greatest risk is to your eyes (and potentially those of your livestock.) Using appropriate eye protection is an easy safety precaution to take, all but eliminating any risk to your vision whatsoever. A comparison might be to that of a welder using an arc shield. You simply MUST use adequate eye protection. When used in a safe manner, I've found lasers to be an effective and surgically accurate way to manage certain pests in marine aquaria.
__________________
-Tom The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore, all progress depends on the unreasonable man. - George Bernard Shaw Current Tank Info: 96X30" 270Gal, Kessil 360WEs, BK250 Double Cone, 400 gal ASW station with continuous water change |
||
12/12/2011, 07:53 PM | #77 |
RC Mod
|
Seems to me that someone setting up an "I'll come to your house with my laser and take out your aiptasia" type business after getting himself insured and bonded, and taking expert precautions, including barring everyone from the room, might be better than people getting one of these things and going through a very, very dangerous learning curve.
__________________
Sk8r Salinity 1.024-6; alkalinity 8.3-9.3 on KH scale; calcium 420; magnesium 1300, temp 78-80, nitrate .2. Ammonia 0. No filters: lps tank. Alk and cal won't rise if mg is low. Current Tank Info: 105g AquaVim wedge, yellow tang, sailfin blenny,royal gramma, ocellaris clown pair, yellow watchman, 100 microceriths, 25 tiny hermits, a 4" conch, 1" nassarius, recovering from 2 year hiatus with daily water change of 10%. |
12/12/2011, 08:17 PM | #78 | |
Registered Member
Join Date: Sep 2009
Location: Brighton, MI
Posts: 1,230
|
Quote:
In reality, it's really not that complex, it's just that there are significant risk of bodily injury if the safety requirements are ignored.
__________________
-Tom The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore, all progress depends on the unreasonable man. - George Bernard Shaw Current Tank Info: 96X30" 270Gal, Kessil 360WEs, BK250 Double Cone, 400 gal ASW station with continuous water change |
|
12/12/2011, 08:52 PM | #79 |
Registered Member
Join Date: Nov 2010
Location: NJ
Posts: 89
|
From what Ive read you can't just buy them. Then i see them on ebay and reading in other threads you can get them from laser forums.
|
12/12/2011, 09:34 PM | #80 |
Registered Member
Join Date: Aug 2009
Location: Northern VA
Posts: 4,618
|
It is my understanding that it is illegal to sell a laser above some number of watts, but you can sell the parts or a kit. That is the way you need to look for them.
__________________
Click my home page for Thread Summaries Current Tank Info: 75 gallon lps and fish |
12/13/2011, 01:37 PM | #81 | |
Registered Member
Join Date: May 2001
Location: San Diego
Posts: 1,079
|
Quote:
Jason |
|
12/13/2011, 01:41 PM | #82 |
Registered Member
Join Date: Nov 2010
Location: NJ
Posts: 89
|
They are still expensive at this point. Wish they had one less dangerous. I feel it's not worth the risk unless you have someone who's done it. I'm not looking to go blind. The rocks would go first lol
|
12/13/2011, 04:06 PM | #83 |
Registered Member
Join Date: Nov 2010
Posts: 572
|
I have ordered an additional set of safety glasses. OD7 rated for the appropriate wavelength I am using. With the large amount of reflection produced when shooting through glass I though it to be a worth wild investment.
I do have a concern that these will block too much light and make the laser dot hard to see. With my OD5 glasses my 1.4W dot still shows quite bright. I think I will still be able to see 1% of an OD5 dot. I’ll post back results after I receive the glasses. Safety glass ratings for reference |
12/13/2011, 05:26 PM | #84 |
RC Mod
|
CalmSeaQuest, I taught school. Many reefing hobbyists do track several things well at once. Unfortunately many, many perfectly worthwhile people cannot walk and chew gum at the same time; and when you throw in--1, know where your dog is; 2, resolve in advance not to be distracted by a ringing phone or doorbell, 3, impress on your 12 year old that they are also to ignore a phone call [the phone being in the living room], 4, figure what could be reflective, 5 have the right kind of safety glasses 6, make sure your work area is clear of reflective surfaces, 7, resolve in advance that should you be burned you are not going to react wildly, 8. have access to where you will need to move without tripping on the supply kit or other stuff on floor----
I'm talking about That Guy who is a sweetheart but who cannot serve himself cranberry sauce while wearing a pale suit. This is why I say far better to deal with a service company who can clear the toddlers and dogs out of the area and zap the designated areas while the homeowner is out of the room.
__________________
Sk8r Salinity 1.024-6; alkalinity 8.3-9.3 on KH scale; calcium 420; magnesium 1300, temp 78-80, nitrate .2. Ammonia 0. No filters: lps tank. Alk and cal won't rise if mg is low. Current Tank Info: 105g AquaVim wedge, yellow tang, sailfin blenny,royal gramma, ocellaris clown pair, yellow watchman, 100 microceriths, 25 tiny hermits, a 4" conch, 1" nassarius, recovering from 2 year hiatus with daily water change of 10%. |
12/13/2011, 05:26 PM | #85 |
Registered Member
Join Date: Nov 2007
Location: San Gabriel, California
Posts: 681
|
I apologize if I missed this but... I didn't see anything describing how to aim the laser. I see references to a lower power green laser for targeting but what is the methodology you are using to aim then fire the larger capacity laser? Thanks!
|
12/14/2011, 08:40 AM | #86 |
Registered Member
Join Date: Dec 2009
Location: Charlotte, NC
Posts: 578
|
This weekend, I started building a "proof of concept" model for a wand that can be used to protect people and livestock from many of the dangers of using a laser in the aquarium.
It uses some common parts and is fairly easy to make. The pieces from bottom to top- •the laser; •a 1" PVC coupling; •a piece of flat PVC cut using a 1" hole saw and with a 1/2" hole cut in the middle. This will allow you to focus the laser without having to first remove it from the holder; •a 3/4" piece of PVC cut to length; •a clear piece of acrylic cut using a 1" hole saw; and, •a safety glass lens with a 1" hole cut in it. The only issue I really had making this was trying to use a hole saw without a center drill bit to drill a clean piece of acrylic. Also, the only silicone I had at home had dried up, so I picked some more glued everything together. My first trial yesterday didn't work out that well. I hadn't sealed the end well enough with silicone and water got in. I added some additional silicone last night and tried it out again today. The second trial was much better. It works very well as a proof of concept. I could get right next to what I wanted to lase without the water interfering with the beam, the shield blocks out most of the light, and I was able to focus the laser with it in use. There are a couple of things, however, that could be improved. I would like to put on a wider shield to stop as many reflections as practical and I need to experiment some with the shield material until I can find one that is effective enough to shield the light, but still let enough through so that you can see the end of the beam with your safety glasses on. CJ
__________________
65 gal Oceanic Starfire w/ Apex Controller, 2 Vortech MP10wES Powerheads, SWC 160 Extreme Cone Skimmer, Calc. Reactor, DIY LED Lights Current Tank Info: 65 gal Oceanic tank w/ starfire glass, 15 gal sump, Apex Controller, DIY LED lighting, 2x Vortech MP10 |
12/14/2011, 09:10 AM | #87 |
Registered Member
Join Date: Aug 2009
Location: Northern VA
Posts: 4,618
|
Can you explain how the flat PVC allows focusing? I am having trouble picturing that.
__________________
Click my home page for Thread Summaries Current Tank Info: 75 gallon lps and fish |
12/14/2011, 09:40 AM | #88 |
Registered Member
Join Date: Dec 2009
Location: Charlotte, NC
Posts: 578
|
The focus knob on the laser fits snugly in the hole drilled into the flat piece of PVC. The PVC is glued to the wand. This allows you to focus the laser by rotating the laser while keeping the wand stationary (or vise versa).
CJ
__________________
65 gal Oceanic Starfire w/ Apex Controller, 2 Vortech MP10wES Powerheads, SWC 160 Extreme Cone Skimmer, Calc. Reactor, DIY LED Lights Current Tank Info: 65 gal Oceanic tank w/ starfire glass, 15 gal sump, Apex Controller, DIY LED lighting, 2x Vortech MP10 |
12/14/2011, 10:15 AM | #89 |
Registered Member
Join Date: Dec 2003
Location: Milwaukee, WI
Posts: 1,161
|
Thread should be closed. This is not safe and many members of the community will try this regardless of warnings. There are ways to deal with aptasia without risk of blindness. Lasers will be better regulated in the future.
__________________
300G SPS reef build in progress Current Tank Info: 300G reef under construction |
12/14/2011, 12:52 PM | #90 | |
Registered Member
Join Date: Sep 2009
Location: Brighton, MI
Posts: 1,230
|
Quote:
Closing this thread, and the like others will not result in lasers not being tried/used in aquaria. It would mean that important safety information will not be available. It's foolish to think that tank owners won't try using lasers, after all I and many others did so without the benefit of any education or safety standards. If anything, showing the potential safety risks and repercussions in such a graphic manner (i.e. burned and bloodied retina) will dissuade many from even considering using a laser, believing the risk/reward ratio to be too steep (a now common response.) That said, your focus on the potential vision risk is completely eliminated by simply wearing the appropriate safety glasses. At present, I don't personally beleive the use of lasers will become wide spread - not because of potential risks to the user (which I believe are easily managed) or even the costs, but rather the steps required to protect the tank inhabitants. You MUST prevent the livestock from being exposed to the beam endpoint and from being struck by the laser beam itself. It certainly can be done, but I suspect the process and equipment required will be more than most are willing to go through. This, in and of itself works toward limiting those willing to use a laser, to those that are willing to take the proper safety precautions - A goal that would not be met if your suggestion to limit this information were enacted. As the costs of higher output diodes continues to fall, they will become far more commonplace. The best opportunity is to educate - not hide and hope no one comes up with a potentially very dangerous use of a new technology.
__________________
-Tom The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore, all progress depends on the unreasonable man. - George Bernard Shaw Current Tank Info: 96X30" 270Gal, Kessil 360WEs, BK250 Double Cone, 400 gal ASW station with continuous water change |
|
12/14/2011, 01:56 PM | #91 | |
Registered Member
Join Date: Dec 2009
Location: Charlotte, NC
Posts: 578
|
Quote:
Oh, we should probably lock any thread with powerstrips in them as salt water and power strips are a potentially deadly combination.. actually, make that anything that uses high-voltage AC. Also, anything with venomous fish. Or zoanthids or palythoas, both of which can have a deadly palytoxin... I'm being a bit facetious, but you can hopefully see my point. There are things we use every day that can be dangerous. I agree with Tom, we need to concentrate on working with these safely. I treat mine like a gun. CJ
__________________
65 gal Oceanic Starfire w/ Apex Controller, 2 Vortech MP10wES Powerheads, SWC 160 Extreme Cone Skimmer, Calc. Reactor, DIY LED Lights Current Tank Info: 65 gal Oceanic tank w/ starfire glass, 15 gal sump, Apex Controller, DIY LED lighting, 2x Vortech MP10 |
|
12/14/2011, 02:36 PM | #92 |
Registered Member
Join Date: Feb 2003
Location: Pittsburgh
Posts: 20,772
|
Maybe a fiber optic extension could be fabricated so that a gloved hand could be used to lase the targets directly from within the tank. This would help to reduce reflections....
|
12/14/2011, 03:23 PM | #93 | |
Registered Member
Join Date: Nov 2010
Posts: 572
|
Quote:
|
|
12/14/2011, 04:13 PM | #94 |
Cheesehead Reefer
Join Date: Jan 2009
Location: Madison, Wisconsin
Posts: 1,351
|
I'm going to comment once more on this thread, and then I'll leave y'all alone.
As higher power diodes become available, I hope these devices become heavily restricted/regulated. Here's why: I'm an airline pilot. I personally have not been lased in flight but one of my friends has. He was flash blinded for the remainder of the flight; fortunately his captain was not. He said it was the scariest thing he's experienced, and he's a former Navy FA-18 pilot, so I don't think he's easily frightened. The fact that at least a couple of people on this thread were able to so easily defeat restrictions meant to keep high powered lasers away from the general populace concerns me deeply. This is something I intend to bring to the attention of my airline's safety department. It's unfortunate that the few fools who think it's funny to get drunk and lase an airliner with 150 people on board spoil it for the responsible...
__________________
"Learn from yesterday, live for today, hope for tomorrow." ~ Albert Einstein Current Tank Info: 215 gal TBS Reef |
12/14/2011, 05:08 PM | #95 | |
Registered Member
Join Date: Feb 2003
Location: Pittsburgh
Posts: 20,772
|
Quote:
|
|
12/14/2011, 05:39 PM | #96 | |
Cheesehead Reefer
Join Date: Jan 2009
Location: Madison, Wisconsin
Posts: 1,351
|
Quote:
I stand by my desire for greater restriction on these weapons.
__________________
"Learn from yesterday, live for today, hope for tomorrow." ~ Albert Einstein Current Tank Info: 215 gal TBS Reef |
|
12/14/2011, 07:00 PM | #97 | |
RC Mod
Join Date: Nov 1999
Location: West Bloomfield, MI
Posts: 17,732
|
Quote:
Closing these threads won't stop discussion of this; it would only stop discussion of it here. I think the best we can do is keep pushing the importance of safety in this situation. For me personally, as an ophthalmologist, I don't think the risk is worth it; aiptasia is annoying, but, IME, controllable with much safer methods. However, that doesn't mean others would weight the factors the same as mine.
__________________
Human beings, who are almost unique in having the ability to learn from the experience of others, are also remarkable for their apparent disinclination to do so. -Douglas Adams Current Tank Info: 14g, 29g nano reefs |
|
12/14/2011, 07:28 PM | #98 | |
Registered Member
Join Date: Feb 2003
Location: Pittsburgh
Posts: 20,772
|
Quote:
While it is possible that some incidents that involve high power lasers and eye damage to polits could be the act of fools who mean no harm, I would venture to say that most lasings involving high power devices are intentional acts at the hands of people who know exactly what they are doing and whos intentions would not be thwarted by any law. I would venture to say that most incidents are the act of fools pointing low power laser pointers at aircraft becuase they are simply clueless. As for the act of using these things to scorch aiptasia... I think the risk far outweighs the benefit, but if somebody wants to burn their eyeballs out (thus earning themselves a Darwin award), then they have that right. |
|
12/14/2011, 07:49 PM | #99 |
RC Mod
|
I'll stick with pep shrimp, which, if you get a selection of juvies, are pretty good; and which don't exit your tank and take out Fido.
__________________
Sk8r Salinity 1.024-6; alkalinity 8.3-9.3 on KH scale; calcium 420; magnesium 1300, temp 78-80, nitrate .2. Ammonia 0. No filters: lps tank. Alk and cal won't rise if mg is low. Current Tank Info: 105g AquaVim wedge, yellow tang, sailfin blenny,royal gramma, ocellaris clown pair, yellow watchman, 100 microceriths, 25 tiny hermits, a 4" conch, 1" nassarius, recovering from 2 year hiatus with daily water change of 10%. |
12/14/2011, 09:17 PM | #100 |
Registered Member
Join Date: Nov 2006
Location: Maryland
Posts: 2,004
|
I got my laser today and it works like a champ.
Glasses, check. Wifey out of the room, check. Dog out of the room, check. Dozens of dead mojanos, check. No more Joes Juice, mixing up kalk paste or taking rocks out to cook them with a blow torch. This is a great method of pest removal but must be done responsibly. |
Tags |
aiptasia, algae, laser, pests, xenia |
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pest id! Helpppp!! | fishyman12 | New to the Hobby | 6 | 07/14/2011 01:46 PM |
brown algae on some of my corals | jenreef | Reef Discussion | 2 | 01/13/2011 02:12 PM |
Various Macro Algae - Good, Bad, or 'oh no!'? | inktomi | Marine Plants & Macroalgae | 3 | 12/12/2009 06:14 PM |
WTB Clean pest and pest algae free LR | chevegan | Southern California Reefers | 5 | 06/02/2008 06:46 PM |