|
09/22/2016, 05:51 PM | #1 |
Registered Member
Join Date: Feb 2005
Location: WI
Posts: 297
|
Getting back into hobby with Nuvo Fusion 10g
So I've been thinking about it for a while but finally pulled the trigger and bought the Nuvo Fusion 10g premium starter kit to get back into the hobby with.
It has been about 7 years or so since I last had a reef tank (65 gal). Once I have the tank physically I will try a few different areas in the room to place it. If I don't like the way it looks on any of the furniture I have then I may consider getting a custom stand for it, or something else. A few of my starter questions for getting all the necessary equipment: 1.) What is the best way to test exsisting furniture for proper weight handling (I'm guessing with all the water and equipment it will be from 100-150lbs of weight). 2.) The kit comes with lighting (SKKYE Light 18 watt LED clamp) which after doing a bit of research I have noticed conflicting reviews. All I plan on keeping coral-wise are softies and maybe an LPS or two towards the top. Will this be enough lighting for these corals? 3.) I'm thinking of adding the Jebao WP-10 for extra flow. I considered this power head because of the cost. I have seen some really expensive others, are they worth the extra cost? Will I need the extra flow? 4.) I purchased the Ghost skimmer to go in the back for filtration. What else should I put in for filtration. There is a 3-stage filter column with removable media basket. Is it worth trying to grow some macro algae in here? Or stick with mechanical filtration? 5.) Any recommended heaters that will fit in the back area, I'm assuming most people are putting them in the compartment with the return pump? 6.) Liverock. When I started my last tank I did a combo of about 60% dry rock as the base and 40% liverock seed to spread. Is this do-able or because of the small size should I just go with all live-rock? If my LFS options are limited, how do I get good looking liverock for aquascaping without seeing it first? 7.) Water testing kits. As I have been out of the hobby for quite some time. What are the best kits? I'm looking for something that is accurate but easy to use. I've started thinking about livestock but its so hard to make a decision when you are only allowed a small bio-load. I'm thinking about doing a pair of ocellaris or perculas due to their hardieness as well as their tank-bred avalability. As far as corals go I really like the color variety of mushrooms and zoas but if anyone has any unique suggestions on softies I'm all ears! I'm sure I'll have more questions as time goes on. I am in no rush to complete things as patience tends to be the best resource in reefkeeping. If anyone has any experience with this tank setup as well any of your experience or pics would be great to hear/see. Thanks, K-Dubbs
__________________
Lets get reefin! Current Tank Info: 10g Nuvo fusion reef |
09/22/2016, 06:19 PM | #2 |
Reefing scene since 4/16
Join Date: Apr 2016
Location: Maine
Posts: 112
|
Welcome back. I just started my 5 gallon evo and still have my 40 gallon breeder. I have some Rasta zoanthids that are awesome. I also have some hairy mushrooms that are pretty cool for their price. If you can do LPS I highly recommend a bleeding Apple scolymia. They are a bit pricey but are really awesome. Maze brains are cool too.
Sent from my SM-G935V using Tapatalk |
09/22/2016, 06:26 PM | #3 |
Registered Member
Join Date: Feb 2005
Location: WI
Posts: 297
|
Thanks reeflover for the suggestions, defenitely some bright looking corals! I defenitely have time to make my suggestions and will do so carefully as I don't have the room for everything I want so must be selective!
__________________
Lets get reefin! Current Tank Info: 10g Nuvo fusion reef |
09/22/2016, 06:30 PM | #4 | |
Registered Member
Join Date: Nov 2011
Location: San Clemente, CA
Posts: 911
|
Quote:
Ssick92's IM Nuvo 10g Nano Reef Build Thread I am going to try to address all your points -- see my comments above in BOLD. Good luck with the tank, make sure to post pictures so we can see what you're doing with your tank. And remember to be patient!
__________________
John IM Nuvo 10g Mixed Reef Nano | Kessil A160we | Mp10QD | Osmolator Nano |
|
09/22/2016, 07:32 PM | #5 | |
Euphyllia Addict
Join Date: May 2012
Location: Brooklyn, NY
Posts: 1,424
|
Quote:
__________________
Just started Red Sea Reefer 350 (75 Gallon) Build Thread - http://www.reefcentral.com/forums/showthread.php?t=2555495 Current Tank Info: Red Sea Reefer 350 |
|
09/22/2016, 07:34 PM | #6 |
Reefing scene since 4/16
Join Date: Apr 2016
Location: Maine
Posts: 112
|
|
09/23/2016, 07:59 AM | #7 |
Registered Member
Join Date: Sep 2000
Location: macon,ga
Posts: 247
|
Stalking
__________________
200 Oceanic 2/400 watt HQI, 1 / 400 watt 20K, 4x96 Actinic. Am3000 on closed loop with OM4 with two OM Revolutions H & S A150-2001 skimmer/ Osmulator/Neptune AC2 / Ca reactor/ Kalk reactor |
09/23/2016, 11:25 AM | #8 |
Registered Member
Join Date: Apr 2004
Location: St Louis...ish
Posts: 108
|
Ikea expedite cubes work well as stands for IM10s or smaller.
I didn't care for the lights at my LFS and went Nanobox I started with a RW-4 with the 12V mod (half's the power) and it worked well. I have upgraded to an MP10, but it is trickier to get flow right. Second the intank media basket. Top notch quality. I run filter floss and chemipure nano in mine. I like the ghost skimmer. I ran it in vinegar for about a day, rinsed and it only took 3 days to a week to break in I would recommend no livestock at all, but all dead rock and dr tims bacteria with ammonia dosing. Keeps pests away Red Sea and API are still good tests kits for the nitrogen cycle Sent from my XT1575 using Tapatalk
__________________
If heaven ain't alot like Detroit, I don't want to go. Current Tank Info: Red Sea Max S 650 |
09/23/2016, 06:15 PM | #9 |
Registered Member
Join Date: Feb 2005
Location: WI
Posts: 297
|
Thanks all for the responses! I will defenitely look into these items when I get a chance. I was having trouble finding the Intank media basket, does anyone have a link?
Once the tank arrives I will try it in a few spots throughout the room and post a few pictures.
__________________
Lets get reefin! Current Tank Info: 10g Nuvo fusion reef |
09/23/2016, 06:20 PM | #10 | |
Registered Member
Join Date: Nov 2011
Location: San Clemente, CA
Posts: 911
|
Quote:
Link: InTank Media Basket Nuvo 10g Edit: Hope I'm allowed to post links? If it gets taken down just search Innovative Marine InTank in Amazon and it should be the first one that pops up.
__________________
John IM Nuvo 10g Mixed Reef Nano | Kessil A160we | Mp10QD | Osmolator Nano |
|
09/24/2016, 11:23 AM | #11 |
Registered Member
Join Date: Feb 2005
Location: WI
Posts: 297
|
I'll defenitely get that inTank basket, I watched a tutorial video on it and it looks nice. I haven't really done much research into the different filtration media. I'll have to look into the chemi pure and purigen.
I've seen mixed reviews on the substrate in terms of color. I'm trying to decide between your typical white/pink color or the black. A lot of people say the black gets dirty too easy but also makes the corals pop. I'll have to see what I can find in terms of nice live rock shapes at the LFS store when it comes time for that. Or maybe I can find some that are larger that look like I could break down into smaller pieces that would work for some nice aquascaping. I'm still debating on the powerhead, it just seems like a lot of $$ to drop. Maybe I will go lower priced for now and upgrade down the road like I do with my computer. One thing I noticed after browsing your tank post ssick92 is that you are using an auto-top off. I hadn't even thought about that. I haven't had a smaller tank before and I never needed one. Is the evaporation really high on your tank?
__________________
Lets get reefin! Current Tank Info: 10g Nuvo fusion reef |
09/24/2016, 10:27 PM | #12 |
Registered Member
Join Date: Feb 2005
Location: WI
Posts: 297
|
Recieved the tank today in the mail. Unboxed and on the area I think I will be keeping it. I took a few pictures.
no light with light with starfire I have to figure something out for the stand. It is plenty sturdy and spacious, however the top has bumps on it from water damage on the wood. The padding on the bottom of the tank helps with this but I'm still worried about pressure points. I may have to do some handywork and sand down the top or something. I'll have to put some sort of mat down underneath the tank as well
__________________
Lets get reefin! Current Tank Info: 10g Nuvo fusion reef Last edited by K-Dubbs; 09/24/2016 at 10:42 PM. |
09/24/2016, 11:25 PM | #13 |
Registered Member
Join Date: Feb 2005
Location: WI
Posts: 297
|
And with the extra stuff out of the tank:
__________________
Lets get reefin! Current Tank Info: 10g Nuvo fusion reef |
09/25/2016, 07:57 AM | #14 |
Registered Member
Join Date: Feb 2005
Location: WI
Posts: 297
|
After some thought I will be changing the location of the tank. While the nightstand works, I have a better location in mind and I will just have to decide on a stand or other furniture to use as storage.
__________________
Lets get reefin! Current Tank Info: 10g Nuvo fusion reef |
09/25/2016, 08:19 AM | #15 |
Registered Member
Join Date: Feb 2005
Location: WI
Posts: 297
|
For those who are interested I have a few pictures of my old 65 gallon which I miss dearly. It was the most expensive learning project ever getting into the hobby with back in the day but I don't regret one second of it!
__________________
Lets get reefin! Current Tank Info: 10g Nuvo fusion reef Last edited by K-Dubbs; 09/25/2016 at 08:24 AM. |
09/25/2016, 10:04 AM | #16 |
Registered Member
Join Date: Dec 2014
Location: United States
Posts: 259
|
Corkwood does great for those pressure points under the tank. And if you wan to put it back on the night stand you can get a piece big enough to cover the top.
__________________
I'm really more a fresh water tank person 125 planted community tank. 29 gallon saltwater tank restarted June 2018 Current Tank Info: 29 gallon coralife bio cube with Superlux lighting |
09/26/2016, 12:37 AM | #17 | |
Registered Member
Join Date: Apr 2004
Location: St Louis...ish
Posts: 108
|
Quote:
Let you coral decide what powerhead you are going to use perhaps? Tunze and Autoaqua both make autotop-offs and they are great for stability in the tank... and going away for the weekend. I use a rubbermaid cereal container as my ato reservoir and fill it every 3 weeks or so. Now for liverock... I personally recommend skipping liverock and the possible nuisances that come with it. Quality dead rock that you can aquascape till your heart is content using 2 part to hold the rocks together is my preference. What about cycling you might ask? I like Dr. Tim's one and only and the ammonia chloride to cycle the tank. It takes longer to turn that pretty purple of corraline, but coral covers that all up anyways in the end! I started mine at the end of June and as of last week... DSC_5365 by Keith D, on Flickr
__________________
If heaven ain't alot like Detroit, I don't want to go. Current Tank Info: Red Sea Max S 650 |
|
09/26/2016, 05:12 AM | #18 |
Registered Member
Join Date: Feb 2005
Location: WI
Posts: 297
|
Very Nice vangvace. Thanks for the tips. I love all the acans! I really like the idea of going with dry rock so I can aquascape how I like. The cycle will take longer but I think it will be worth it to make the layout interesting. Will be looking into the auto top offs once I get a stand figured out.
__________________
Lets get reefin! Current Tank Info: 10g Nuvo fusion reef |
09/27/2016, 12:24 AM | #19 |
Registered Member
Join Date: Apr 2004
Location: St Louis...ish
Posts: 108
|
Actually the cycle is quicker because there isn't the die-off that comes from liverock in my limited experience and quite a bit of reading. I did buy a pod culture and green water after the cycle to kick off some microverts. They'll also come naturally with your corals too of course.
__________________
If heaven ain't alot like Detroit, I don't want to go. Current Tank Info: Red Sea Max S 650 |
09/28/2016, 02:30 PM | #20 | |
Registered Member
Join Date: Nov 2011
Location: San Clemente, CA
Posts: 911
|
Quote:
But yes IMO an auto top off system is an absolute MUST for a tank this small. Salinity swings are magnified in such small tanks because there isn't a ton of water to begin with, and as water evaporates the salinity rises quickly. With larger tanks it takes more evaporation to have the same effect so it might not be as critical. I use the Tunze Osmolator Nano -- there are some cheaper alternatives but Tunze is known as one of the best. In my previous tanks I used the JBJ ATO system with an aqualifter for the pump. Worked well enough but was going to take up too much room in my small stand. I use a 1 gallon cereal container for my ATO reservoir as well, and it needs to be refilled about weekly.
__________________
John IM Nuvo 10g Mixed Reef Nano | Kessil A160we | Mp10QD | Osmolator Nano |
|
09/28/2016, 02:48 PM | #21 | |
Registered Member
Join Date: Nov 2011
Location: San Clemente, CA
Posts: 911
|
Quote:
If you can get live rock from a quality source, I would go this route over dry rock (but that is just my opinion). Everyone always talks about the "pests" that come on live rock, but nobody ever brings up the fact that live rock introduces many beneficial hitchhikers (bristleworms, feather dusters, sponges, etc.). I used 100% live rock from an established in my tank (8lbs) and didn't even register a cycle.
__________________
John IM Nuvo 10g Mixed Reef Nano | Kessil A160we | Mp10QD | Osmolator Nano |
|
09/28/2016, 04:41 PM | #22 |
Registered Member
Join Date: Apr 2004
Location: St Louis...ish
Posts: 108
|
Out of curiousity, have you done a dry rock cycle? Understand how ammonia dosing works? The bacteria reproduces much faster than you might believe, but your experiences differ from mine and that is ok.
Beneficial but not necessary hitchhikers, some of which will come via frags and coral introduction anyway. Is it worth the possible pests, unwanted algae, and unknowns with live rock out of the gate? That is for each of us to decide with every new build.
__________________
If heaven ain't alot like Detroit, I don't want to go. Current Tank Info: Red Sea Max S 650 |
10/06/2016, 09:46 AM | #23 |
Registered Member
Join Date: Feb 2005
Location: WI
Posts: 297
|
Did some shopping around, haven't found anything that I like for a stand, probably going to break down and get the one that is on sale on marinedepot.
I've done some browsing at a store near me that carries a variety of tank raised clowns, going to see about getting some in the color variations I like. Looking at either gladiator or black ice snowflake.
__________________
Lets get reefin! Current Tank Info: 10g Nuvo fusion reef |
10/06/2016, 10:13 AM | #24 | |
Registered Member
Join Date: Aug 2016
Posts: 13
|
Quote:
Perhaps you could cycle with dead rock and then add a few pounds of live to populate the tank. I can see why you'd want to go the dead route, but good live rock will add so much more to your tank. Just my two cents |
|
10/13/2016, 01:35 AM | #25 |
Registered Member
Join Date: Feb 2005
Location: WI
Posts: 297
|
That was my original plan professor sweat. A base of dry rock to do aquascaping the way I'd like and a few smaller pieces of live rock to seed the tank with.
__________________
Lets get reefin! Current Tank Info: 10g Nuvo fusion reef |
Thread Tools | |
|
|