|
01/17/2018, 05:02 PM | #1 |
Registered Member
Join Date: May 2015
Posts: 84
|
ghl connect setup guide
is there a setup guide for ghl connect? im running a p3 and a doser 2
|
01/18/2018, 04:34 PM | #2 |
Registered Member
Join Date: Jul 2015
Posts: 236
|
1. P3 should have at least FW 6.29
2. P3 should be connected to your network. 3. You will need to know the IP address of your P3. 4. Open GHL Connect, create a new connection, enter the IP address of the P3, then connect. Also make sure you are running the latest version of GHL Connect. |
01/24/2018, 06:09 PM | #3 |
Registered Member
Join Date: May 2015
Posts: 84
|
went to update my doser 2 and it seems to have bricked it. gcc said it completed then it failed to load a usb driver let it sit for a few minutes. power cycle and nothing. i opened it up and the wifi module light is turning on and if i hit the boot-loader button it shows up as usbvcom port 15.
help to remedy this quickly would be appreciated. |
01/24/2018, 06:25 PM | #4 |
Registered Member
Join Date: May 2015
Posts: 84
|
got it figured found the manual on emerg flash
|
Thread Tools | |
|
|