|
09/28/2020, 06:24 PM | #1 |
Registered Member
Join Date: Nov 2011
Posts: 694
|
Fair priced acrylic vendor?
Looking to make an overflow custom setup.
If anyone has a cheap source for 1/4 black acrylic and bulkheads let me know!
__________________
Keep our planet clean "PH s/b 7.9-8.3, salinity 1.024-6; alkalinity 8.3-9.3; calcium 420; magnesium 1300, temp abt 80. Alk and cal will not rise if mg is low." Last edited by Danzig; 09/28/2020 at 07:12 PM. |
09/29/2020, 06:53 AM | #2 |
Registered Member
Join Date: Jul 2010
Location: Austin, TX
Posts: 1,985
|
Good luck! Good friend of mine is shop manager for an acrylic manufacturing company. She said acrylic prices have gone through the roof because of the demand for all kinds of custom PPE. She's having to order expensive high strength stuff just for basic things. You might try finding the nearest companies that manufacture stuff from acrylic and start checking thier dumpsters for leftovers. Sci-Grip #40 is a 2 part that is a lot stronger than the single part #3, #4 or #16 if you find what you need.
__________________
"Our crystal clear aquaria come nowhere close to the nutrient loads that swirl around natural reefs" Charles Delbeek |
09/29/2020, 09:41 AM | #3 |
Registered Member
Join Date: Nov 2013
Location: Louisville,Kentucky
Posts: 1,208
|
__________________
President Louisville Marine Aquarium Society. http://www.lmas.org/ The 3rd Annual Frag swap will be held September 23rd,2017 11 am till 3pm Saint Thomas Fellowship hall,9616 Westport Road,Louisvi |
09/29/2020, 01:44 PM | #4 | |
Registered Member
Join Date: Nov 2011
Posts: 694
|
Quote:
Those are all retrofit kits. I have an already drilled tank in the bottome with a smashed up overflow, so i either need a full sized or custom.
__________________
Keep our planet clean "PH s/b 7.9-8.3, salinity 1.024-6; alkalinity 8.3-9.3; calcium 420; magnesium 1300, temp abt 80. Alk and cal will not rise if mg is low." |
|
|
|