|
11/28/2017, 12:14 PM | #1 |
Registered Member
Join Date: Mar 2007
Location: Wapakoneta,OH
Posts: 100
|
Apex dos for water changes along with Apex auto water topoff
Does anyone hear run these two together and care to share your program or any setup insight?
|
11/29/2017, 01:51 PM | #2 |
Registered Member
Join Date: Jun 2010
Location: Tampa
Posts: 643
|
I use the DOS for auto water change and use the Apex to control my RO Auto top off.
__________________
Matt Don't pee on my leg and tell me it's raining. Current Tank Info: 190 |
11/29/2017, 01:59 PM | #3 |
Registered Member
Join Date: Jun 2010
Location: Tampa
Posts: 643
|
Here's what I do for water change:
DOS Outlets: DOS_12_1_Cle Set OFF Fallback OFF If Output V_Water_Chan = ON Then DOS_WaterCh Set OFF Fallback OFF If Output V_Water_Chan = ON Then DOS_WaterCh Virtual Outlet: V_Water_Chan Set OFF Set OFF If Output V_Fill_Clean = ON Then ON If Time 19:00 to 21:00 Then ON If Output V_Feed_Cycle = ON Then OFF If Output V_Sump_Low = ON Then OFF If Output V_Sump_Low_C = ON Then OFF If Output V_Leak = ON Then OFF If Output V_Pump_Delay = ON Then OFF If Output V_Clean_Empt = ON Then OFF If Output V_RO_Fill = ON Then OFF If Output V_Dirty_Full = ON Then OFF If Output V_WCDisable = ON Then OFF If Output V_Maintenanc = ON Then OFF If Output V_ALL_STOP = ON Then OFF **I have many things that if they occur I don't want it to try and do a water change. DOS Profile: DOS Rate: 250ML Direction: Foward Per DOS Amount 1000.0 Dose intervals: 1500 Dose Count: 4 Here is a picture of my WC/ATO setup in my Garage:
__________________
Matt Don't pee on my leg and tell me it's raining. Current Tank Info: 190 |
12/11/2017, 01:02 PM | #4 |
Registered Member
Join Date: Aug 2008
Location: South Florida
Posts: 262
|
APEX Fusion now has the ATK configuration options,... you just need to walk thru it...
|
Thread Tools | |
|
|