|
11/19/2017, 05:53 PM | #1 |
Registered Member
Join Date: May 2000
Location: Union, Ohio, USA
Posts: 6,590
|
Bulkhead placement
I have 2 2 bulkheads half way up my tank side wall. I am wanting to add 4 more toward the top of the tank on the same wall as the return lines for my closed loop.
Are the distances from the edge of the tank and each other ok? Its a 1 thick acrylic panel. Or should I go with smaller bulk heads, the pump has 1.5 output but I already have the hole saw for 2 Sent from my iPhone using Tapatalk
__________________
I'm a SaltGeek are You? All LED since 2010. Current Tank Info: 375 Gallon Reef with siporax, all LED lighting, and Red Dragon 3 and Abyzz A200 on 2 closed loops. |
11/19/2017, 07:05 PM | #2 |
Registered Member
Join Date: Feb 2011
Location: Cypress, Texas
Posts: 1,904
|
Acrylic shouldn't really care where you put the holes so much as glass would.
|
11/19/2017, 09:16 PM | #3 |
Registered Member
Join Date: Nov 2013
Location: Baton Rouge
Posts: 1,410
|
I don’t know all the details on acrylic tanks, but the spacing u have would be ok on a glass tank. So it should be more then ok on acrylic.
|
Thread Tools | |
|
|