|
03/17/2018, 04:52 PM | #1 |
Registered Member
Join Date: Jul 2003
Location: San Diego, CA
Posts: 140
|
Setting for Vortech in 7 ft peninsula?
I have 4 mp40 in my 7 ft long 30" wide and 24" tall peninsula tank. Two pumps on each short end with SPS corals.
I have tried to use the EcoSmart function in Nutrient Transport Mode but whatever I try there is always a dead spot in the center of the tank. For best all around flow I use the Gyre for 2-3 min in each direction using sync and anti sync on opposing pumps. Are there other creative ways to run them without ReefLink or Apex?
__________________
7 foot by 30" wide and 24" tall 265 gal SPS peninsula style reef. 3 x 250 W MH and 2 Reef Brite XHO strips.. Old 300 g reef: M. Paletta, Ultimate Marine Aquariums, p. 48. |
03/19/2018, 05:13 PM | #2 |
Registered Member
Join Date: Jul 2003
Location: San Diego, CA
Posts: 140
|
Seriously no one on RC has suggestions?
__________________
7 foot by 30" wide and 24" tall 265 gal SPS peninsula style reef. 3 x 250 W MH and 2 Reef Brite XHO strips.. Old 300 g reef: M. Paletta, Ultimate Marine Aquariums, p. 48. |
Thread Tools | |
|
|