|
12/30/2017, 05:37 PM | #1 |
Registered Member
Join Date: Jul 2003
Location: Bixby, OK
Posts: 981
|
ATI 6 bulb dimmable Issue
Anyone ever see their ati dimmable do this? I have unplugged it several times and the timer and date wont pull up so I can adjust settings.
Any thoughts? Sent from my iPhone using Tapatalk
__________________
1.025 SG/High-pH 8.021 Low-pH 8.00/9-9.3dKh/Ca 440/Mg 1280/Temp 78.5/NO3 .25 ppm/PO4 0/ORP 380 Current Tank Info: 91 gallon RSR 350/RO 152s protein skimmer/36” ATI Dimmable/Neptune WAV/Neptune Apex |
12/30/2017, 05:51 PM | #2 |
Molon Labe
Join Date: Jan 2008
Location: Louisiana
Posts: 1,550
|
One of mine did that. Had to get a new controller from ATI; they're not hard to swap out.
__________________
secesh |
12/31/2017, 02:02 AM | #3 | |
Registered Member
Join Date: Dec 2013
Posts: 1
|
Quote:
Tapatalkkal küldve az én BAH-L09 eszközömről
__________________
Using Tapatalk |
|
12/31/2017, 07:37 AM | #4 |
Registered Member
Join Date: Sep 2003
Location: North Carolina
Posts: 20,050
|
Yes just leave it unplugged longer...They discuss it in the manual too..
Its usually not broken and pretty darn common.
__________________
Who me? |
01/03/2018, 08:45 PM | #5 |
Registered Member
Join Date: Jul 2003
Location: Bixby, OK
Posts: 981
|
Yeah read in the manual to unplug for 15 hours for complete reset.
That was the fix. Thanks guys! Saved me $105 for new controller and the install Sent from my iPhone using Tapatalk
__________________
1.025 SG/High-pH 8.021 Low-pH 8.00/9-9.3dKh/Ca 440/Mg 1280/Temp 78.5/NO3 .25 ppm/PO4 0/ORP 380 Current Tank Info: 91 gallon RSR 350/RO 152s protein skimmer/36” ATI Dimmable/Neptune WAV/Neptune Apex |
|
|