|
11/22/2018, 07:58 AM | #1 |
Registered Member
Join Date: Nov 2018
Posts: 2
|
6105 help
I have bought a 6105 and it makes a bit of noise running compared to my other 1. I tried cleaning bit no success. The metal drive shaft has come out of the motor block and needs reseating. I just wanted to check which way round the bushing and attenuation disk go. I'm guessing the bushing goes the side closest to the motor?
|
11/25/2018, 05:55 AM | #2 |
Registered Member
Join Date: Nov 2018
Posts: 2
|
So I glued the shaft back into the motor block and the difference in noise levels is incredible. Now my quite 1 sounds loud. This one will be getting glued also tonight
|
11/26/2018, 09:24 AM | #3 |
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
The disk is installed so the blue rubber faces the motor and the black plastic disk faces the drive unit slotted side up.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
|
|