|
04/13/2014, 05:55 PM | #1 |
Registered Member
Join Date: Dec 2007
Location: Largo, FL
Posts: 1,526
|
Largo 120 new build
Well, here I go again
Moved here in May 2013, have had reef tanks since 1989. Thought I could do the move without a tank.... ha! 120g (4x2x2). Not much room, but squeezing in the 120 (my favorite is 180 6x2x2) but this will work . I am a Zeovit user from the past so will go with that again. Had good success so will continue. I have been gathering stuff so: 120g 4x2x2 38g sump Acrylic Will run 2 100micro filter socks (I change out every day) JNS SK2 Skimmer Vertex 1.5L Zeovit Rx Coralvue ATO Panworld 100PX (thanks planefantic) Tunze wavebox and WP25 circulation Reefbreeders photon 48 LED (Have my trustworthy MH for backup!) Reefkeeper Elite Controller with pH, Temp, 2x energy bars, switch inputs Float switches - High Level overflow Box, High Level Sump, Low Level Sump, Skimmer overflow High Level Durso Overflow Spectrapure RO/DI Red Sea Regular salt (I like to use a salt with 7-8 Alk) because of the ULNS of Zeovit) Prolly 2 weeks before up and running. Got to do foam back wall and cure, carbon cure for a week and then ready to "rock" I will update a little each evening as I build up any advise appreciated for sure. I have been doing this awhile, but I learn something new everyday!!!
__________________
300G 96x24x30, BK250 Skimmer with Avast Swabbie, LED/T5, Geo CaRx with Masterflex effluent cntl, Zeovite User - Avast Marine Tumbler, Archon control, Vortech MP60,Tunze 6125, & Jebao RW20 making waves |
04/13/2014, 06:47 PM | #2 |
"ship it"
Join Date: Apr 2009
Location: Tampa/Westchase
Posts: 2,951
|
Looks like a sweet set up! What are your stocking plans?
__________________
"You gon learn today!" Current Tank Info: SPS Dominant 29g BB Rimless Bio Cube lit by 2x AI Primes, IM desktop Reactor, Tunze ATO, Tunze. 9001 skimmer ........ 40g Breeder with 20g long sump/refugium. ATI 4 bulb T5s....Mixed reef stock heavy on SPS. |
04/13/2014, 06:57 PM | #3 |
Registered Member
Join Date: Dec 2007
Location: Largo, FL
Posts: 1,526
|
sps mainly on corals. Fish, I have my favorites (couple PJ Cardinals, Percs, sailfin, CB butterfly) but always open to suggestions for sure. Looks like a lot of great reefers here in TB area and looking to join the local club for advise and "support system". I do admit, I still like many of the softies and LPS as well. Always give and take as when you do the ULNS, seems like some items just don't do as well.
__________________
300G 96x24x30, BK250 Skimmer with Avast Swabbie, LED/T5, Geo CaRx with Masterflex effluent cntl, Zeovite User - Avast Marine Tumbler, Archon control, Vortech MP60,Tunze 6125, & Jebao RW20 making waves |
04/13/2014, 06:58 PM | #4 |
Registered Member
Join Date: Aug 2012
Location: Largo, FL
Posts: 3,844
|
Largo people are stepping up their game lol. Looks like a really awesome build. Can't wait to see this thing running.
__________________
Gone Fishing. |
04/13/2014, 07:13 PM | #5 | |
Registered Member
Join Date: Dec 2007
Location: Largo, FL
Posts: 1,526
|
Quote:
__________________
300G 96x24x30, BK250 Skimmer with Avast Swabbie, LED/T5, Geo CaRx with Masterflex effluent cntl, Zeovite User - Avast Marine Tumbler, Archon control, Vortech MP60,Tunze 6125, & Jebao RW20 making waves |
|
04/13/2014, 09:08 PM | #6 |
Registered Member
Join Date: Jan 2013
Location: Clearwater Fl
Posts: 67
|
Whoop! Another Largo reefer! Gonna be a sweet build man
|
04/13/2014, 09:12 PM | #7 |
Moved On
Join Date: Apr 2014
Posts: 10
|
WOW. Look nice and neat, man. Keep updating man.
|
04/13/2014, 09:37 PM | #8 |
Registered Member
Join Date: Dec 2013
Location: Largo, FL
Posts: 157
|
Looks awesome!!!! Glad to see that Pan World working for you. Looks very clean, can't wait to see it run as well
|
04/14/2014, 05:42 PM | #9 |
Registered Member
Join Date: Dec 2007
Location: Largo, FL
Posts: 1,526
|
Added the Durso and the return lines tonight in the overflow box. Started a little more rough in below in sump area with the return line. Haven't glued the underside yet and need to provide hangers as well. The two valves are basically for whatever (reactor, backup pump, water change, etc). Also worked on the background (foam wall with a few ledges). Hope to have the background coated with epoxy and sand covered tomorrow.
Strange fitting on the 1" bulkhead return to overflow, the fitting is not even snug. Hope it's the sched 40 fitting and not the bulkhead. I will play with that in the morning with a piece of 1" pipe to see what (or who) the issue is!
__________________
300G 96x24x30, BK250 Skimmer with Avast Swabbie, LED/T5, Geo CaRx with Masterflex effluent cntl, Zeovite User - Avast Marine Tumbler, Archon control, Vortech MP60,Tunze 6125, & Jebao RW20 making waves |
04/16/2014, 06:23 PM | #10 |
Registered Member
Join Date: Dec 2007
Location: Largo, FL
Posts: 1,526
|
ok, moving along
changed pump to tank line a little, added return from durso to sump. Still need to fab the holder for the filter bags, but you can get the idea. Got my Photon 48 LED. Cut out the hood to fit. Just right height and I think I will like this light. Great value, great warranty (2 years includes shipping as well) .... we will see . Finishing up rock background. Still need to do the overflow cover (in process now). Used pond foam and gorilla glue as in the past, never had any issues with it. covered with Aragonite. will fill with RO/DI this weekend and start running carbon and maybe something for phosphate, again, I will see where I am at before adding gfo. Thinking about just starting with local cured rock, but then I think about local collected (Tbs or Gulfview). any opinions? getting there! mike
__________________
300G 96x24x30, BK250 Skimmer with Avast Swabbie, LED/T5, Geo CaRx with Masterflex effluent cntl, Zeovite User - Avast Marine Tumbler, Archon control, Vortech MP60,Tunze 6125, & Jebao RW20 making waves |
04/16/2014, 06:38 PM | #11 |
Premium Member
Join Date: May 2013
Posts: 2,044
|
that setup looks really cool I like the wall you built....just wondering is that safe with the top frame missing around the overflow, and is the black overflow and glass overflow box going to collect detritus in between the two?
|
04/16/2014, 06:46 PM | #12 | |
Registered Member
Join Date: Dec 2007
Location: Largo, FL
Posts: 1,526
|
Quote:
black overflow will be siliconed to glass and sealed at top, bottom and ends. I have run this config before and was able to seal it well
__________________
300G 96x24x30, BK250 Skimmer with Avast Swabbie, LED/T5, Geo CaRx with Masterflex effluent cntl, Zeovite User - Avast Marine Tumbler, Archon control, Vortech MP60,Tunze 6125, & Jebao RW20 making waves |
|
04/16/2014, 06:53 PM | #13 |
Premium Member
Join Date: May 2013
Posts: 2,044
|
good deal,,,,looks good
|
04/19/2014, 05:29 PM | #14 |
Registered Member
Join Date: Dec 2007
Location: Largo, FL
Posts: 1,526
|
ok, pretty much ready to add water. Just need silicon to sit for a few days then "GO!". Rock wall background done, everything added (except one float switch). Sorry for the crappy photo ..... i am not a good iphone photographer!
__________________
300G 96x24x30, BK250 Skimmer with Avast Swabbie, LED/T5, Geo CaRx with Masterflex effluent cntl, Zeovite User - Avast Marine Tumbler, Archon control, Vortech MP60,Tunze 6125, & Jebao RW20 making waves |
05/18/2014, 08:22 PM | #15 |
Registered Member
Join Date: Aug 2012
Location: Largo, FL
Posts: 3,844
|
This is honestly one of the cleanest builds I've ever seen. It was nice meeting you Mike.
__________________
Gone Fishing. |
05/19/2014, 01:49 AM | #16 |
Registered Member
Join Date: Dec 2013
Location: Largo, FL
Posts: 157
|
Mike your tank looks so clean! I love your build. Also thank you so much for the ro and aggregate. I will be able to drop off your jugs later tomorrow. Mike(CrazyEyes) is going to fill them up tomorrow in the morning for another 20 to add. After I unload the water I can swing by.
Next time we come by, should have a couple of beers and enjoy the Florida weather! |
05/19/2014, 06:43 AM | #17 |
Registered Member
Join Date: Dec 2007
Location: Largo, FL
Posts: 1,526
|
Thanks for swinging by Mike and Joe (CrazyEyes/Planefanatic). It was great putting faces to names! Build going well as you saw. 4 weeks in and things appear to be going well. As soon as I see some calcium "uptake" I will be happy, but it is still pretty fresh.
And YES, next time we can sit by the pool and enjoy some beers for sure! mike
__________________
300G 96x24x30, BK250 Skimmer with Avast Swabbie, LED/T5, Geo CaRx with Masterflex effluent cntl, Zeovite User - Avast Marine Tumbler, Archon control, Vortech MP60,Tunze 6125, & Jebao RW20 making waves |
08/29/2014, 02:39 PM | #18 |
Registered Member
Join Date: Dec 2007
Location: Largo, FL
Posts: 1,526
|
__________________
300G 96x24x30, BK250 Skimmer with Avast Swabbie, LED/T5, Geo CaRx with Masterflex effluent cntl, Zeovite User - Avast Marine Tumbler, Archon control, Vortech MP60,Tunze 6125, & Jebao RW20 making waves |
08/29/2014, 02:42 PM | #19 |
Registered Member
Join Date: Aug 2012
Location: Largo, FL
Posts: 3,844
|
Sweeeeeeeeeeeeet! Nice purple and Clarkis. Tank is looking a good.
__________________
Gone Fishing. |
08/29/2014, 03:37 PM | #20 | |
Registered Member
Join Date: Dec 2007
Location: Largo, FL
Posts: 1,526
|
Quote:
__________________
300G 96x24x30, BK250 Skimmer with Avast Swabbie, LED/T5, Geo CaRx with Masterflex effluent cntl, Zeovite User - Avast Marine Tumbler, Archon control, Vortech MP60,Tunze 6125, & Jebao RW20 making waves |
|
08/29/2014, 03:42 PM | #21 |
Registered Member
Join Date: Aug 2012
Location: Largo, FL
Posts: 3,844
|
I'd say a 300 is going to be needed, I mean, you got that poor tang in the little 120g.
__________________
Gone Fishing. |
08/29/2014, 03:54 PM | #22 |
Registered Member
Join Date: Dec 2002
Location: New Tampa FL
Posts: 2,807
|
James let me know if you order the 300 maybe we can get a good deal if 2 are ordered.
__________________
330g SPS - LED/T5 - EShopp S-300 Skimmer - 4 x Jebao PP20- reefkeeper elite Current Tank Info: 210 gallon mixed reef lps sps |
08/29/2014, 04:31 PM | #23 | |
Registered Member
Join Date: Dec 2007
Location: Largo, FL
Posts: 1,526
|
Quote:
__________________
300G 96x24x30, BK250 Skimmer with Avast Swabbie, LED/T5, Geo CaRx with Masterflex effluent cntl, Zeovite User - Avast Marine Tumbler, Archon control, Vortech MP60,Tunze 6125, & Jebao RW20 making waves |
|
08/29/2014, 05:21 PM | #24 |
Registered Member
Join Date: Jul 2011
Posts: 433
|
Definitely one of the cleanest setups I've seen, I have some new ideas for the doors on my stand. If you ever have any questions this man has some knowledge and experience. Thanks again!!!!!
__________________
------Aaron------ Current tanks: 180 RR |
08/29/2014, 05:36 PM | #25 | |
Registered Member
Join Date: Dec 2007
Location: Largo, FL
Posts: 1,526
|
Quote:
__________________
300G 96x24x30, BK250 Skimmer with Avast Swabbie, LED/T5, Geo CaRx with Masterflex effluent cntl, Zeovite User - Avast Marine Tumbler, Archon control, Vortech MP60,Tunze 6125, & Jebao RW20 making waves |
|
|
|